Great new item from tickbitesupply, slip on recoil pad for medium shotguns and rifles with straight stocks. Reduces felt recoil to protect that shoulder and help with accuracy. Appx 5 1/2" from top to bottom, unit stretches over butt stock.

Detailed Information:

Easy slip on design, stays put when installed. Provides a non slip surface while greatly reducing felt recoil. A great David's Collectibles problem solver.

Specs:

Reduces felt recoil up to 70%
Easy to install
Uses the latest high tech recoil reducing polymer
High performance recoil reduction at a fraction of the cost of other performance brands

Stud Mount Accessory Rail MNT-SSA

You have a sling swivel stud, but you need to use a rail mounted accessory. This great item converts the stud to a rail mount. Easy installation allows you to insert mount to stud, tighten wedge plate and install you favorite bipod, grip, light or laser!

Detailed information:

Metal mount with anti scratch back surface
Easy do it yourself installation, tools included
Hard anodized black finish

Specs:

Slots: 5
Length: 2 1/4"
Finish: Black

Sling Swivel 1.25"

Tickbite Tactical™ Sling Swivel for any stock with a sling swivel stud. Quick release, high quality! Handles any sling 1 ¼" wide or less. A new item we have had a lot of demand for! Do not have the stud, no problem, sling swivel studs are below!

Sling Swivel Stud 10-32 Fine Thread

Tickbite Tactical™ Sling Swivel Stud with 10-32 thread pitch. Use with either Quick Detach Sling Swivel above. Also see our Stud spacer SLI-SRNG1032 below.

Sling Swivel Stud Spacer 10-32 Fine Thread

Tickbite Tactical™ Sling Swivel Stud Spacer with 10-32 thread pitch. Use with our SLI-STD1032 threaded stud to set the depth of the stud in the stock or Shotgun Cap.

Sling Swivel Stud 12-16 Coarse Thread

Tickbite Tactical™ Sling Swivel Stud with 12-16 thread pitch. Use this in wood or synthetic stocks. Simply drill hole smaller than stud and screw stud in. Use with either Quick Detach Sling Swivel above.

Rail Mount and Quick Detach Sling Swivel

Great item, mount clamps to Piatinny or Weaver rails and the inclided Quick Detach swivel locks into the mount with the push of a button. Handles all slings up to 1 1/4 inches wide, this heavy duty unit makes sling installation a snap.

Sling Attachment Plate for the Model 4 STK-ARSLD

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this ambidextrous attachment point.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows looping of sling either left or right. Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Sling Attachment Plate for the Model 4 STK-ARSLD2

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this ambidextrous attachment point.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows attachment of single point sling either left or right. Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Sling Attachment Plate for the Model 4 STK-ARSLD4

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this single point attachment plate.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows attachment of single point on your rifle Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

Sling Attachment Plate for the Model 4 STK-ARSLD5

Easily install that single point sling on your collapsible stock rifle. Replaces the stock plate with this single point attachment plate.

Detailed Information:

Replaces the 4 or 6 Pos Collapsible plate, Allows attachment of single point sling on your rifle. Black oxide carbon steel. Easy installation allowing weapon to be carried in single point position.

Specs:

Easily replaces stock plate
Single point sling attachment point
All metal construction
Black finish

AK Pistol Grip Sling Plate SLI-TBTAKSPMNT

Your rifle needs a single point attachment, but no way to do it. This TBT item solves that problem. Simply remove your pistol grip, install the plate, re-install the grip and your single point sling clips to the plate. Ambidextrous design allows for both right handed and left handed shooters.

Detailed Information:

Plate is made of steel for years of use. Looks allow for the attachment of single point slings such as our SLI-TBT002B or our SLI-TBT. Easy installation. Note that on some PAP rifles with a rivet under the plate you may need to notch the plate to install. An easy operation. Used the same grip screw, no modifications to the weapon.

Specs:

Material: Steel
Finish: Black
Fitment: Single Point Slings
Configuration: Ambidextrous Design

AK Pistol Grip Sling Plate SLI-TBTDRACO

Your AK Pistol needs a single point attachment, but no way to do it. This TBT item solves that problem. Simply remove your pistol grip, install the plate, re-install the grip and your single point sling clips to the plate. Ambidextrous design allows for both right handed and left handed shooters.

Detailed Information:

Plate is made of steel for years of use. Looks allow for the attachment of single point slings such as our SLI-TBT002B or our SLI-TBT. Easy installation. Note that on some PAP Pistols with a rivet under the plate you may need to notch the plate to install. An easy operation. Used the same grip screw, no modifications to the weapon.

Specs:

Material: Steel
Finish: Black
Fitment: Single Point Slings
Configuration: Ambidextrous Design

Click Here to return to top of page
Please change number in box if you want more than one, then click "buy me" and this will carry you to the shopping cart, Then hit the "back" button on your browser to return to buying until you are ready to check out.
Please note-standard shipping price is for Con US only, others will be charged as necessary to cover shipping and handling, if you are going to pay by money order or check please note this on your order and we will hold the order until money order arrives, all checks held two weeks to clear. No returns without a Return Authorization number from us and SHIPPING/HANDLING/INSURANCE charges are not returned, no exceptions.

™ Website Design by TICKBITE SUPPLY COMPANY ™
Copyright © 1999-2023 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form.