Fully adjustable CAR15 Stock for your milled AK Rifle! Six Great positions for you shooting pleasure! Made in the USA and counts as a compliance part. Use with our AR slip on buttpad found on our AR or Stock pages with this stock!

Click here to return to top of Page

AK Forend

AK Polymer Quad Rail System STK-TBTAKHGP

Great easy to install forend with quad rails for the standard AK. Quad system simply replaces existing upper and lower, giving you a sharp looking and functioning forend. Rails on the bottom, top and both sides give you many options for your accessories.

Detailed Information:

Upper and lower front handguard rail system for the AK family. Lower has 10 slot 5" rail, each side has a 1 slot 2" rail and the top has a 11 slot 5" rail. Great fit on standard AK, slight fitting may be required on Milled AK. Made of tough military spec polymer this handguard set is light weight and tough. Product by TBT Tactical, this unit allows the mounting of all your accessories, lights, laser, red dots and vertical grips. Product Note: Will not fit M70 family of Yugo rifles with longer handguard, and will not fit AMD65 or Saiga and others that are not the standard AK forend. Easy installation

Specs:

Upper gas tube handguard with rail
Lower handguard with bottom rail and 2 side rails
Material: Black polymer
Length: 6 1/2"
Pieces: 2

AK Galil Style Handguard OD Green STK-AKHGGALILOD

Give your AK weapon a whole new style. Based on the Galil handguard system, this bolt on handguard gives you a great look and a much better forward grasp of the weapon. Made in the USA of quality components this David's Collectobles product will give you years of hard use.

Detailed Information:

100% made in the USA forend is made of military grade polymer. Direct replacement of your AK forend on standard AK rifles. Works with original gas tube, improves ventilation around the barrel.

Specs:

Made in the U.S.A.
Reduces heat and improves ventilation by providing a greater cooling area around the barrel
Modeled after the original Galil pattern
Constructed from military grade composite
Removable top cover for full Galil type ventilation
U.S. Sec. 922r compliant part
Lifetime warranty

Click here to return to top of Page

AK Pistol and Verticle Grip

AK Pistol Grip Dark Earth STK-AKPGDE

This is our US made original style pistol grip for the AK rifle. Patterened after the Soviet style this David's Collectibles best seller looks great and is as tough as can be.

Detailed Information:

As we said with our Fixed Stock, occasionally nothing beats the original. With the Original Style Pistol Grip you get the look of the original while adding a U.S. made part. The checkered side provides an excellent gripping surface so you can make sure you always have a perfect grip on your AK.

Specs:

Counts as 1 U.S. 922r Compliant Part
Manufactured from high strength composite material
100% US Made
Weight: .10 lb

AK Pistol Grip OD Green STK-AKPGOD

This is our US made original style pistol grip for the AK rifle. Patterened after the Soviet style this David's Collectibles best seller looks great and is as tough as can be.

Detailed Information:

Specs:

Counts as 1 U.S. 922r Compliant Part
Manufactured from high strength composite material
100% US Made
Weight: .10 lb

Pistol Grip AK German Surplus Brown Poly STK-AKPGPBRN

AK Pistol Grip, East German Brown Polymer Military surplus pistol grip from the former East German armies. Grip is in used good surplus condition. Color is East German brown, grip has non slip checkering. Uses standard AK grip screw. Another great item from tickbitesupply! (See our grip screw below!).

Pistol Grip AK 4 Pack German Surplus Brown Poly STK-AKPGPBRN

AK Pistol Grip, 4 pack, East German Brown Polymer Military surplus pistol grip from the former East German armies. Grip is in used good surplus condition. Color is East German brown, grip has non slip checkering. Uses standard AK grip screw. Another great item from tickbitesupply! (See our grip screw below!).

AK Pistol Grip Ergonomic Style OD Green STK-AKPGEG

Brand new, and much requested. Our new AK Pistol Grip with Ergonomic Finger Grips. This hot new grip features palm swells, thumb rest and non slip synthetic material. Includes screw! Easy installation, rock solid mounting.

Detail Information:

Robust Design with Combat Grade Synthetic Material. Ergonomic Finger Grooves Provide Solid and Repeatable Grip. Concealed Compartment for Small Parts and Tools. Additional Hand Support Provides Stable and Easy Trigger Control.

Specs:

Material: Polymer
Weight: 5.4 oz
Color: OD Green

AK US Made Black Pistol Grip

Great new synthetic black pistol grip with non slip finish. Just what you need to complete that rifle project or update a worn or damaged grip. Made in the US. (See our grip screw below!)

Detail Information:

Original Design with Combat Grade Synthetic Material. Ergonomic style to Provide Solid and Repeatable Grip. USA manufacture for compliance. Additional Hand Support Provides Stable and Easy Trigger Control.

Specs:

Material: Polymer
Weight: 5.4 oz
Color: Black

Click here to return to top of Page

AK Stock Accessories

AK Rubber Butt Pad STK-AKBUT

Buttpad is made of durable rubber. Pad extends stock by 1" and has hole for cleaning kit trap door. Easy installation using existing screws. Great tickbitesupply accessory for you AK. More comfortable shooting experience. Only fits standard AK with wood buttstock and screws appx 2 7/8" inches apart center to center.

Detailed Information:

Heavy duty rubber pad is easy to install. Simply remove the two screws in your buttplate, leave the metal plate in place and install the pad using the same screws with the metal grommets against the buttplate. Adds length to stock pull, Absorbs recoil and Allows access to tube cleaning kit

Specs:

Material: rubber
Color: Black
Thickness: 1"
Weight: 2.0 oz
Length: 3 7/8"

AK Pistol Grip Sling Plate SLI-TBTAKSPMNT

Your rifle needs a single point attachment, but no way to do it. This TBT item solves that problem. Simply remove your pistol grip, install the plate, re-install the grip and your single point sling clips to the plate. Ambidextrous design allows for both right handed and left handed shooters.

Detailed Information:

Plate is made of steel for years of use. Looks allow for the attachment of single point slings such as our SLI-TBT002B or our SLI-TBT. Easy installation. Note that on some PAP rifles with a rivet under the plate you may need to notch the plate to install. An easy operation. Used the same grip screw, no modifications to the weapon.

Specs:

Material: Steel
Finish: Black
Fitment: Single Point Slings
Configuration: Ambidextrous Design

AK Pistol Grip Sling Plate SLI-TBTDRACO

Your AK Pistol needs a single point attachment, but no way to do it. This TBT item solves that problem. Simply remove your pistol grip, install the plate, re-install the grip and your single point sling clips to the plate. Ambidextrous design allows for both right handed and left handed shooters.

Detailed Information:

Plate is made of steel for years of use. Looks allow for the attachment of single point slings such as our SLI-TBT002B or our SLI-TBT. Easy installation. Note that on some PAP Pistols with a rivet under the plate you may need to notch the plate to install. An easy operation. Used the same grip screw, no modifications to the weapon.

Specs:

Material: Steel
Finish: Black
Fitment: Single Point Slings
Configuration: Ambidextrous Design

AK Pistol Grip Screw

Ak Pistol Grip screw, unused military surplus. Replace that damaged screw or keep this spare for later. Fits standard pistol grip, will not fit Chinese thumbhole stocks which use a shorter than standard length screw. Screw is 4 1/2" in length.

AK Strikeforce Aluminum Rail Set

Designed for use with the above RI-STK-AKA2300 stock set, this is the metal rail set (heat treated aluminum) to replace the polymer set included with the stock kit. Use for extreme heavy duty use, police, military, or just for those that want the best.

AK to AR Car stock Adapter

Great new item! Adapter mounts in the stamped AK reciever, the same as the stock does! When installed you can mount any AR 4 or 6 Position adjustible stock in your AK. The possibilities are endless! Great addition to your AK rifle! AK Stock Adapter

Click Here to return to top of page

AK Wood Stocks

AK Lower Handguard Wood European STK-AKHGWLLE

Hard to find item for your AK. Original Laminated wood lower handguards. These are in excellent condition. Another hard to find item from Davids Collectibles. Note that the finish may vary from the picture, but these can easily be refinished to match your stock. Some fitting to your rifle may be necessary.
Please note: As with any wood product there may be slight differences in stain color and style. Some of the hardware pictured may not be included or may be different than pictured as will be the case with military surplus products.

Features:
AK Lower Wood Handguard
Laminated Wood
Excellent condition

Specs:
Length: 6 1/2 inches
Width: 1 1/2 inches
Height: 1 3/4 inches
Weight: .20 Lbs

Need more info, call us
1-252-746-2040

AK Upper Handguard Wood STK-AKHGWUC

Wood upper handguard for you AK rifle. These are getting very hard to find and our inventory is getting smaller. Another Davids Collectibles offering. These are in excellent to like new condition, will need to be finished to match your stock set, an easy task. Some fitting may be necessary to install on your rifle, these fit all AK's with standard AK47/74 setup.
Please note: As with any wood product there may be slight differences in stain color and style. Some of the hardware pictured may not be included or may be different than pictured as will be the case with military surplus products.

Features:
Excellent condition new old stock manufacture
Direct replacement for your missing or damaged piece.
Easy installation

Specs:
Length: 4 1/2"
Width: 1 1/2"
Height: 1 1/4"
Weight: .10 lbs

Need more info, call us
1-252-746-2040

AK Upper Handguard Wood STK-AKHGWUE

Wood upper handguard for you AK rifle. These are getting very hard to find and our inventory is getting smaller. Another Davids Collectibles offering. These are in excellent used condition, will need to be finished to match your stock set, an easy task. Some fitting may be necessary to install on your rifle, these fit all AK's with standard AK47/74 setup.
Please note: As with any wood product there may be slight differences in stain color and style. Some of the hardware pictured may not be included or may be different than pictured as will be the case with military surplus products.

Features:
Excellent condition
Direct replacement for your missing or damaged piece.
Easy installation

Specs:
Length: 4 1/2"
Width: 1 1/2"
Height: 1 1/4"
Weight: .10 lbs

Need more info, call us
1-252-746-2040

Click Here to return to top of page
Please change number in box if you want more than one, then click "buy me" and this will carry you to the shopping cart, Then hit the "back" button on your browser to return to buying until you are ready to check out.
Please note-standard shipping price is for Con US only, others will be charged as necessary to cover shipping and handling, if you are going to pay by money order or check please note this on your order and we will hold the order until money order arrives, all checks held two weeks to clear. No returns without a Return Authorization number from us and SHIPPING/HANDLING/INSURANCE charges are not returned, no exceptions.

™ Website Design by TICKBITE SUPPLY COMPANY ™
Copyright © 1999-2024 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form.