Surplus STG58 compensator for the FAL STG58 rifles. Unique features are the wire cutting slots and unit comes with a blank firing screw in device for use whan using blank rounds. These are from Austrian STG58 FAL rifles and are the correct Left Hand thread. Small lot on hand, grab one while you can.

Surplus Parts Information

Please note that parts are Military Surplus rifle take offs in most cases and will show wear and use. Due to the large amount of factories and rifle variants be sure the part you receive will function as the part it is replacing. We do our best to identify parts but if in doubt consult your gunsmith versed in the weapon you own. Item pictured is representive of this item, due to different manufacturers and time periods there may be cosmetic differences, but function will be the same. We cannot hand pick or look for specific stamps or codes.

Specs:

Length: 5 1/2"
Material: Steel
Finish: Military Parkarized
Condition: Very good used
Weight: 8.1 oz

SKS Compensator

SKS compensator, second generation, pins on barrel! Fits all models except the M59/66 SKS with grenade launcher.

Click here to return to top of Page

AK Compensator

AK Comp 14x1LH Thread Hungarian COMP-AKAMDCOMP

In stock and shipping Hungarian Compensators original to the AMD AK's. These are take off's and are a fantastic compensator and muzzle brake. Made for military use, these steel comps are just the thing your AK47 7.62x39 caliber rifle needs. They are designed to sound like multiple rifles firing at once, confusing and demoralizing the enemy. Fit all AK rifles with threaded barrel in 14x1 Left handed thread in 7.62x39 caliber

Detailed Information:

All steel compensator fits AK47 rifles with 14x1 Left Hand threads on the end of the barrel. Compensator has the locking groove to accept your rifles locking pin. These for the most part are new rifle take offs, may show finish wear, no rust.

Specs:

Condition: Very Good Used Surplus
Fitment: AK47 14x1LH Threads
Caliber: 7.62x39
Weight: .25 lb
Color: Black
Length: 3"

AK74 Screw on Krinkov (Krink) Style Compensator

Screw on compensator for the AK74. Russian Krinkov pattern design, does a great job of controlling barrel rise. Standard AK74 24 x 1.5 thread. (To use the AK74 Compensator on a standard AK47 left hand thread AK see adapter below)

AK Compensator Adapter 14x1 Left to 24x1.5 Right Thread

Thread adapter adapts 14x1MM left hand thread to 24x1.5 right hand thread, AK47 threaded barrel to AK74 compensator. Use with the above COMP74KRINK compensator to mount on your AK47! Hurry, limited inventory!

AK Compensator

AK compensator for the 7.62x39 AK47, Russian style, pins on barrel! Fits MAK90, AK's without threaded barrels. Resolved the barrel rise problem when firing the AK.

Click here to return to top of Page

AR Compensator

AR15 A2 Flash Hider 1/2-28 COMP-TLARFH01

Why take your chances with someones unknown quality AR compensator. Our steel comp is made to function and fit as it should. Unit comes with a new crush washer, making installation a snap. Another David's Collectibles best of items.

Detailed Information:

UTG Standard AR15 A2 Flash Hider and Crush Washer Assembly. Alloy Steel Construction with a Matte Black Hard Coat Manganese Phosphate Surface Treatment. 1/2"-28 UNEF Thread.

Specs:

Material: Steel
Pieces: 1
Height: 0.87"
Length : 1.76"
Weight: 2.3 oz
Color: Black

AR Thread Protector 1/2x28 Thread

New heavy duty screw on thread protector for the AR rifle. CNC machined part is heat treated and made of high quality steel. Hard anodized black finish for years of use. Fits all standard barrel AR's with 1/2x28 thread. Don't let the threads get damaged on your AR in the field or during transport, get one today!

Compensator AR Long Style COMP-ARCOMPLONG

Great compensator for your AR platform .223/556 rifle. Based off the very successful AK compensator this unit does a great job of controlling barrel rise and flash. Simply screw on the adapter base and lock it on with four set screws. Screw on the comp and you are ready to go.

Detailed Information:

Compensator helps control and balance out pressure allowing gas to escape in a manner that counteracts the natural rise of the barrel. Unit is made of all steel and finished in black. Fits rifles with 1/2x28 thread.

Specs:

Length: 3 1/4"
Material: Steel
Finish: Black
Parts: 2 (Comp and Adapter)
Weight: 5.6 oz

AR .223 Compensator Krink Style

New 4 piece Krinkov style compensator for the .223 AR15 and M16. Comp comes with adapter to screw onto 1/2x28 thread of the AR15 Rifle. Krink comp reduces muzzle lift and reduces pressure to make shots more accurate and reduce barrel rise. Give that AR rifle the upgrade it needs!

AR .308 Compensator Krink Style

New 4 piece Krinkov style compensator for the .308 AR. Comp comes with adapter to screw onto 5/8x24 thread of the AR10 Rifle. Krink comp reduces muzzle lift and reduces pressure to make shots more accurate and reduce barrel rise. Give that AR rifle the upgrade it needs!

AR .223 Compensator Krink Style

New 4 piece Krinkov style compensator for the .223 AR. Comp screws onto the AR15/M16 1/2x28 thread of the AR15/M16 Rifle. Krink comp reduces muzzle lift and reduces pressure to make shots more accurate and reduce barrel rise. Give that AR rifle the look and function of this great comp!

AR Compensator Long Style

How about a AK Soviet style compensator for your AR. This is it! Screw on compensator is patterened after the AK74 Russian Compensator. It has proven itself over and over for being very effective at controlling climb on AK's. Screws on AR threaded barrel's.

Crush Washer AR .223 PAR-ACRUSH

Crush washer for the AR .223 rifle. Crush washer goes between the compensator and the shoulder on the barrel to lock in the compensator and keeps it from working loose. Insures proper clocking of the compensator porting. Never reuse a crush washer, always replace when removing the compensator. Another David's Collectibles problem solver!

FEATURES:
• No gunsmithing required
• Thread flash hider / muzzle
brake and torque 15-20lbs.
• Ensures proper indexing for the flash
hider / muzzle brake

SPECIFICATIONS:
Length: 0.75"
Weight: .1 oz.

Click here to return to top of Page

Ruger Comp

Mini 14 Compensator Stainless

Compensator for the Mini 14 .223 rifle. Compensator is Stainless Steel. Easy installation

Compensator for the Ruger 10/22

Compensator for the Ruger 10/22 rifle, blued steel, long style

Compensator for the Ruger 10/22

Compensator for the Ruger 10/22 rifle, Stainless Steel, long style

Compensator for the Ruger 10/22

Compensator for the Ruger 10/22 rifle, Stainless Steel, Short Style

Compensator for the Ruger Mini 30

Compensator for the Ruger Mini 30 rifle, blued Steel.

Click here to return to top of Page

Mauser Blank Adapter

Swedish Mauser Blank Firing Device COMP-MAUOT966

Swedish Mauser Model M96 and M38 blank firing device for wooden tipped blank ammo. This fits models with threaded barrels and is designed to burn up the wooden projectile on practice ammo. Note that this is not to be used with standard ammo. Screws onto the end of the threaded barrel and locks around the front sight. A great addition to complete your Swedish Mauser rifles accessories.

Detailed Information:

Blank firing device is used only with wood tipped practice ammo. The device burns up the wooden tip on practice ammo. All metal construction with flip clip to lock behind the front sight and works only on Swedish Mausers with threaded barrels.

Specs:

Condition: Used Very Good
Fitment: M96 and M38 Swede Mauser
Caliber: 6.5x55
Weight: .40 lb
Color: Black
Length: 4"

Click Here to return to top of page
Please change number in box if you want more than one, then click "buy me" and this will carry you to the shopping cart, Then hit the "back" button on your browser to return to buying until you are ready to check out.
Please note-standard shipping price is for Con US only, others will be charged as necessary to cover shipping and handling, if you are going to pay by money order or check please note this on your order and we will hold the order until money order arrives, all checks held two weeks to clear. No returns without a Return Authorization number from us and SHIPPING/HANDLING/INSURANCE charges are not returned, no exceptions.

™ Website Design by TICKBITE SUPPLY COMPANY ™
Copyright © 1999-2023 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form.