|
Po Box 897, Grifton, North Carolina, 28530 Phone 1-252-746-2040 Fax 1-252-746-2525 Email: sales@tickbitesupply.com "Your Online collectible Superstore!" |
|
Scope Ring Sets For 1" Tube ScopeLink to 1 inch Weaver Base RingsLink to 1 inch .22/Airgun Dovetail Base Rings Link to Ruger Style Half Moon Rings Link to Cantilever Mounts | Link to Ring Mounts Scope Ring Sets Weaver 1in Dia Scope Ring Set Steel 1" 4 Screw Medium Height by TBT Tactical™Make mine steel! All steel medium height ring set for 1" diameter scopes. Ring cap has 4 screws per ring for solid holding of scope. All machined steel for hard use shot after shot!Ring Set 1" Scope Steel .500 Height RNG-PM218DAll steel ring set made for 1" diameter scopes, medium height, works best with 42-52mm objective diameter. Fits Picatinny or Weaver spec rails. This is for the shooter that demands the best mounting system for their scope. This tickbitesupply part features 3 top screws per top to hold your scope firmly in place.
Ring Set 1" Low Profile RNG-TBT1LGreat new ring set for your 1" tube scope. Rings are low profile with 2 cap screws per cap. Great ring when you want an all metal low cost ring. Another David's Collectilbles best seller. Fits scopes with up to 45 mm diameter.
Ring Set 1" Med Profile RNG-TBT1MGreat new ring set for your 1" tube scope. Rings are medium profile with 2 cap screws per cap. Great ring when you want an all metal low cost ring. Another David's Collectilbles best seller.
Ring Set 1" High Profile RNG-TBT1HGreat new ring set for your 1" tube scope. Rings are high profile with 2 cap screws per cap. Great ring when you want an all metal low cost ring. Another David's Collectilbles best seller.
Ring Set 1" Med Max Strength RNG-RG2W1154Need a medium profile ring set for that 1 inch scope, this max strength ring set is for you. Rings fit Weaver and Picatinny rails, and work with optics up to 55mm objective. Rings are see thru so you can see your iron sights. Another David's Collectibles best seller.
Quick Release H/D Ring SetMax Strength LE Grade Quick Detach Picatinny Rings: 2PCs, 1" Diam, Med Profile Unit features 6 screws on each top cap. Lever lock is adjustible for a tight trouble free fit to all rails. Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny or Weaver Rail. High Quality Synthetic Protective Tape Applied on Rings Internal Surface. Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero Performance. Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enforcement Personnel.Ring Set 1" Med Max Strength RNG-RG2W1156Need a medium profile ring set for that 1 inch scope, this max strength ring set is for you. Rings fit weaver and picatinny rails, and work with optics up to 55mm objective. Rings are see thru so you can see your iron sights. Another David's Collectibles best seller.
Ring Set 1 Inch High Quick Detach RNG-RQ2W1204Ring set for 1 inch diameter tube scopes. Rings feature Quick Detach for tool free rock solid installation and removal. Heavy Duty rings hold your optics tight and in place. A great set of rings at a easy on the budget price from David's Collectibles.
Ring Set 1" High Max Strength RNG-RG2W1204Great high profile ring set for 1 inch scope. Max strength ring set is built tough, designed to hold your optics on target and are all metal. Rings fit Weaver and Picatinny rails, work with optics up to 65mm. Another David's Collectibles best seller.
Ring Set 1" Medium Height Weaver RNG-RG18W25MRing set for one inch scopes in a medium height. Rings fit rails in both Weaver and Picatinny specs. Lock screw is flush keeping your set up clean and secure. Made from space age materials, this ring set will be with you for the long haul. A David's Collectibles featured item.
Ring Set With 2 Slot Accessory Mount Low MountRing Set for 1" optics on a Weaver or Picatinny rail. Unit has a integral rail on one ring with 2 slots for mounting items like small red dots, laser's, lights, and more.Ring Set With 3 Slot Accessory Mount Med MountRing Set for 1" optics on a Weaver or Picatinny rail. Unit has a integral rail on one ring with 3 slots for mounting items like small red dots, laser's, lights, and more.1" Tactical .500 Height Steel Ring SetCNC Machined carbon steel rings for 1" scope tubes and 42-52mm objective lens. Rock solid mount, ring height from the top of the rail/mount to the bottom of the scope tube is .500 of an inch. These rings clamp to Picatinny and Weaver rails. Extreme Heavy duty! Another Tickbite Tactical product!1" Steel Lever lock Low MountGreat new ring set for those wanting lever tighten and loosen rings. 1" scope and Weaver base, set of steel rings feature lever lock.1" Steel Lever lock Medium MountGreat new ring set for those wanting lever tighten and loosen rings. 1" scope and Weaver base, set of steel rings feature lever lock.Ring Mount 1" Medium Compact Integral Accushot RNG-RGWM2PA25M2Great 1 piece rail system for 1" diameter scopes up to 50mm objective diameter. Fits Weaver and Picatinny rails. Short length (75MM long) Integral see-thru features 2 rail locking screws and one lock pin. Ring caps have 2 screws per cap for rock solid mounting. Another great David's Collectibles item.
Ring Mount Offset 1" High Weaver/Picatinny RNG-RGWMOFS3825H4Accushot Offset one piece ring mount allows you to fine tune your eye relief on that favorite optic. Bi-directional means you can turn the mount for more or less eye relief. All metal construction for years of hard use. A David's Collectibles problem solver.
Click here to go Back to top of page Scope Ring Sets .22/Airgun 1in Dia Scope AccuShot .22/Airgun Ring Set LowScope ring set, 1" ring for .22/Airgun dovetail base. Fits up to 45mm objective Do not settle for someone elses cheap flimsy ring set, these are heavy duty tactical rings with four scope hold down screws per ring. Once again we overbuilt it so you can use them for a long time to come. This is a pair (2) of rings.Ring Set 1 inch Med Height Accushot RNG-RGPM25M2Medium profile ring set for 1 inch scope and Dovetail base. Accushot ring set is built tough, designed to hold your optics on target and are all metal. Rings fit Airgun/.22 3/8" Dovetail rail. Work with optics up to 53mm. Another David's Collectibles best seller.
Ring Set 1 inch Med Height Accushot RNG-RGPM25M4Medium profile ring set for 1 inch scope and Dovetail base. Accushot ring set is built tough, designed to hold your optics on target and are all metal. Rings fit Airgun/.22 3/8" Dovetail rail. Work with optics up to 45mm. Another David's Collectibles best seller.
.22/Airgun Ring Set MediumMedium Profile, fits objective up to 50mm. Airgun/22 dovetail base, For 1" Dia Scopes, 4 hex screws on top to tightly secure scope. Features adjustible Stop-Pin for rock solid mounting!Ring Mount 1" Dovetail Medium Integral Accushot RNG-RGPM2PA25M4Great 1 piece rail system for 1" diameter scopes up to 50mm objective diameter. Fits 3/8 dovetail and 11mm dovetail with its reversable locking plate. Heavy duty design mount is 4 5/8" long (100mm) and features 3 rail locking screws and one lock pin. Ring caps have 4 screws per cap for rock solid mounting. Another great David's COllectibles item!
Ring Mount Offset 1" High Dovetail RNG-RGPMOFS3825H4Accushot Offset one piece ring mount allows you to fine tune your eye relief on that favorite optic. Bi-directional means you can turn the mount for more or less eye relief. All metal construction for years of hard use. A David's Collectibles problem solver.
Click here to return to top of Page Ruger Style Half Moon Ring Ruger Style Half Moon Ring Low MountLow mount Ring for the Ruger style half moon reciever. Ring fits both 1inch and 30mm scopes. This is one ring, you will need to order 2 for use with a scope.Same Great Ring in Silver Finish! Click here to go Back to top of page Cantilever Ring Mounts Cantilever Ring Rail Mount 30mm / 1" RNG-CL001Offest cantilever rail ring mount is just the ticket to mount magnifiers, dot sights and tube sights such as night vision to your receiver or Picatinny and Weaver rail. All metal construction for years of hard use. Requires 1 1/4" of rail length.
Cantilever Ring Rail Mount 1" RNG-CL002Offest cantilever rail ring mount is just the ticket to mount magnifiers, dot sights and tube sights such as night vision to your receiver or Picatinny and Weaver rail. All metal construction for years of hard use. Requires 1 1/4" of rail length.
Cantilever Offset Ring Rail Mount 1" RNG-CL003Offest cantilever rail ring mount is just the ticket to mount magnifiers, dot sights and tube sights such as night vision to your receiver or Picatinny and Weaver rail. All metal construction for years of hard use. Requires 2" of rail length.
Ring Mounts Scope Mount Adapter 1" scope MNT-MT049Great scope mount ring adapter. Goes around the scope and with the choice of 2 lengths of rail, allows the mounting of dot sights, lights or any of the accessories you need. Be sure your scope has appx 1/2" of space for the ring to go around. Great problem solver from tickbitesupply.com Rails can be adjusted for best position.SPECIFICATIONS: Scope Daimeter: 1" Rail Length: 1.75"/2.25" Weight: 1.3 oz. FEATURES: • Black anodized aircraft grade aluminum • Accepts all standard Weaver / Picatinny 1913 accessories • 2 Adjustable accessory rails 1.75"/2.25" Scope Mount Adapter 30mm scope MNT-MT048Great scope mount ring adapter. Goes around the scope and with the choice of 2 lengths of rail, allows the mounting of dot sights, lights or any of the accessories you need. Be sure your scope has appx 1/2" of space for the ring to go around. Great problem solver from tickbitesupply.com Rails can be adjusted for best position.SPECIFICATIONS: Scope Daimeter: 30mm Rail Length: 1.75"/2.25" Weight: 1.3 oz. FEATURES: • Black anodized aircraft grade aluminum • Accepts all standard Weaver / Picatinny 1913 accessories • 2 Adjustable accessory rails 1.75"/2.25" Website Design by TICKBITE SUPPLY COMPANY Copyright © 1999-2023 David's Collectibles. The names Tickbite Supply Company, Tickbite Tactical, Tickbite Optics as well as all material on this site is the exclusive property of David's Collectibles and cannot be used in any form. E-mail davistarr@aol.com for permission to use the material in any form. |