Information
Firearms
Hot New Items
Tactical Gear
Rifle Cases
Accessories
Magazines
Scopes and Mounts
Stocks
Slings
Books
MPA
Specials
Parts Kits
AK
SKS
AR Gear
Mosin Nagant
Chef Leo's Products
Show Schedule
My favorite Links
PO Box 897, Grifton, NC 28530-phone 1-252-746-2040 Fax 1-252-746-2525
Fast Link to Items on This Page!
AR Scopes and mounts |
AR Stocks and Stock Accessories
AR Accessories |
AR Magazines
AR15 and AR Scopes And Mounts
AR Rear Sight MNT950RS02
M4/M16 Complete Match-grade Rear Sight with Windage/Elevation Adjustment and Integral Picatinny Mounting Deck.
AR Removable Front Sight Assembley
Removable Front Sight Tower Complete with A2 Square Post Assembly, Quick detachable front sight with adjustable A2 Square Post Assembly! Fit's all Picatinny/Weaver-style rails. Equipped with locking retention thumb nut. Precision elevation adjustments to enhance shooting accuracy.
AR Flip Up Front Sight
A new much requested item. From Tickbite Supply™ our new AR15/M16 Flip Up front sight. Quick Detachable Front Sight with Adjustable A2 Square Post Assembly to Fit All Picatinny/Weaver-style Rails! Equipped with Locking RetentionThumb Nut. Heavy duty and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions. Precision Elevation Adjustments to Enhance Shooting Accuracy!
AR Flip Up Rear Flat Top Dual Aperture Sight Assembly
Integral Picatinny/Weaver Mounting Deck to Fit All Flat Tops! Dual Aiming Apertures for All Shooting Requirements! Precision Windage Adjustments, Heavy Duty and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions User Friendly Locking Thumb Nut for Easy Installation
Cantilever Mount 30mm with 1" Insert
New Tickbite Tactical™ product! Cantilever mount is just the ticket for our SCPRD1530 1.5x30 red dot, or any similar system where you need the flexibility if a cantilever mount. Unit has quick detach thumb screw (no tools needed), mounts to Weaver or Picatinny spec rails. Unit fits all 30mm tubes and comes with a free 1" insert to use with 1" tube optics, taclights etc!
AR Quad Rail System
New Full Metal Quad Rails Now In! Just released new product, all metal handguard rail system. Four Mil-Spec Picatinny rails for a variaty of accessories, solid locking very secure fit! Simple installation, no gunsmithing or required. Fits CAR length model 4, model 15 and model 16 and variants. Hard anodized finish for wear resistance and years of hard use. Includes a FREE set of our UTG Rail Covers! Hurry, limited special.
AR Quad Rail Medium Length MNT-HG416MA
Much requested! Mid length AR Quad Rail System! Precision machined for maximum strength! Four mil-spec Picatinny rails for all accessory applications! Simple and friendly installation, no gunsmith or tool required. Solid locking features for the most secure fit. Ultimate tactical solution to enhance accuracy under toughest environments. Fits mid length Model 4,15,16 rifles and variants! Hard anodized finish for wear resistance. UTG rubber rail guard included for great comfort and protection.New Quad Rail just released and much requested!
AR Quad Rail Rifle Length
Precision machined for maximum strength! Features Four mil-spec Picatinny rails for versatile accessory applications. Simple and easy installation, no gunsmith or tool's required. Integral assembly alignment front tabs and spinal cords to guarantee perfect rock solid fit! Ultimate tactical solution to enhance accuracy under the toughest environments. 12" Length, 27 slots on each side of Picatinny/Weaver quad rail, Fits rifle length Model 4, 15/16 and variants. Hard anodized black finish for wear resistance and includes free 20 piece set of UTG rubber rail guards comfort and protection
Rail Panel Covers
These are the same great rubber rail covers that come with out great AKQUAD and our ARQUAD rail sets. This is a 12 pack and each cover is 2" long. These covers fit any Picatinny rail system and are a must to protect your rails during hard use! Order extra's today!
Ergo Rail Panel Ladder Style
Ladder Style Rail Panel. Fits Picatinny rails, fits in the grooves for ease of handling. Can be cut to length or use more than one section for longer applications. Flexible panels are 6.875" length. Protect your rails from mud and debris under hard use. One section, black in color.
Barrel Clamp Rail Mounts
Barrel Rail Mounts. Provide one or two rails to mount accessories. Made of tough aviation grade anodized aluminum. Can be installed above and below or on both sides of the weapon. Precision machined for tight fit, durable and lightweight. A great accessory item for any weapon!
Dual Picatinny Angled Rail for M16/AR15/M4 Handguard
Angled rail set for the AR handguard, can be mounted above or below. Mounts in pre existing holes in your handguard, includes mounting hardware! Rails are angled at 45 deg.
Bayonet Lug Rail Mount
Rail mounts to your Bayonet Lug and allows the installation of Weaver/Picatinny accessories such as bipod's, light, laser's etc. CNC machined lightweight Aluminum with a hard anodized finish.
AR15/M16 Barrel Mount Tri Rail
Brand New and Shipping! Our new Barrel Mount TRI Rail ! Deluxe Tri-Rail Barrel Mount Complete with 2-PC Separated Barrel Adaptor. Hurry, don't let everyone else get one first! Our QDSW28 Deluxe QD Swivel is also available, see below.
QDSW28 Deluxe QD Swivel
Quick Release 1-1/4" Sling Swivel designed for the MNTBR101TR Barrel Mount Tri Rail! Picture shows Swivel on our MNTBR101TR Tri Rail.Just out!
Barrel Clamp Tri Rail
Universal Barrel Clamp Tri-Rail System! Clamps securly around barrel and features two slots per tri-rail. Also has a laser clamping feature! A much requested item! AK/SKS/FAL/AR/Cetme/HK and many more! Loads of Applications!
Barrel Clamp Tri Rail
Universal Barrel Clamp Tri-Rail System! Clamps securly around barrel and features five slots per tri-rail. Also has a laser clamping feature! A much requested item! AK/SKS/FAL/AR/Cetme/HK and many more! Loads of Applications!
Barrel Clamp Quad Rail
New from Tickbite Tactical™ Universal Barrel Clamp Quad-Rail System! Clamps securly around barrel and features three slots per Quad-rail. 1.39" length and weighs in at 2.60 oz! A much requested item! AK/SKS/FAL/AR/Cetme/HK and many more! Loads of Applications! Set includes 3 sets of different length screws to mount to any barrel!
Carry Handle and Rail Scope Mount
3-Point Eye Relief Adjustable Integral Carry Handle Ring Mount Complete with Flat Top Adaptor! Robust and solid carry handle mount complete with 1” integral tactical rings. 3 adjustable mounting positions to tightly secure the carry handle and allow for flexible eye relief adjustment. Designed with maximum ring mount support for hard tactical use. Additional flattop adaptor with two thumbscrews and full-length claming plate securely lock mount to flattop base. Also mounts to Picatinny rail! Another Must Have From Tickbite Supply!
Quad Rail Gas Block Mount
Robust gas block Picatinny quad-rail modular system to replace existing front sight Allows for versatile accessory applications. Machined from aircraft aluminum. Perfect fit with our solid front sight to retain your iron sights. For the HBAR (.75") model. note: This is the Quad Rail only, accessories offered are extra.
Red Dot Flat top Cantilever Mount 30MM
Mount allows attaching of Aimpoint, Burris and other 30mm red dot sights to rifles with flat top or Picatinny rail. This mount allows for co-witnessing of iron sights with the red dot sights on flat top AR15 rifles and carbines. Hard anodized aircraft grade aluminum construction, includes hardware.
AR AR15 Front Sight Clamp Mount System
You Asked us for it, Here it is! AR front sight Clamp On Rail System. Clamps onto the front sight and gives you a rail on each side to mount Taclight's, Laser's, you name it! Tough metal construction Another new item we offer! Fits tightly in the opening of the front sight and is angled the same as the opening in the sight.
Laser and Mount SCPLS168
TS Platform and SSS Structure for Durable and Responsive Internal Adjustments! Clear and Extra Bright Laser Beam! Precise and wide Range Windage and Elevation Adjustments for all Firearms! Universal Clamp-on Mounting Deck to fit most Tactical Firearms with or without Rail Slots! Ambidextrous Push Button Switch and Remote Pressure switch, the best of both worlds! Hard Anodized Finish for Wear Resistance! Six AG-13 (LR44) Alkaline Button Cell Batteries! (unit uses 3, and 3 free extra!) Aim and Instant Lock on Targets to Enhance Your Shooting Accuracy and Performance! Most Versatile Laser for A Wide Range of Pistols, Shotguns and Rifles! Free metal case for storage! 3 Allen wrenches included. What are you waiting for?
T28 Reticle Intensified Scope
T28 Reticle Intensified Tactical Scope (SCP-T28) Objective-to-Ocular Entirely One piece Tube with Integral STANAG Mounting Deck - 6061 T6 Aluminum Molded Integral Precision Windage/Elevation Adjustment - Range > 30 MOA. Integral Light Housing with Rail for Utilizing External LED Light of ANY color You Desire. Etched Glass Advanced Range Estimating (ARE) Reticle with Special Illumination Coating Reflects the Same Color as the LED Light! Ergonomic Eye Piece for Precision Adjustment with Excellent Clarity. Fits any STANAG Type Scope Mount! Includes red light source, does not include mount base.
Laser System Green Beam with Mount
Much requested Military spec green laser with mount. Features high visible green laser
beam, heavy duty black matt finish, heavy duty mount for Picatinny or Weaver rail system.
Includes heavy duty remote pressure switch as well as push button switch, battery (lithium 123).
* High precision sharp Green dot laser (Can targeting & focusing accurately)* Military official Aluminum, suitable for all environments (forest, desert)
* Military official Aluminum adjustable laser sight
* Standard X-Y Windage and Levitation click for adjustment
* Comes with 20mm Metal mount suitable for Metal 20mm Rail
* Made by full Aluminum, quality & durability is ensured.
* Remote pressure switch activated pad (to switch on/off the laser)
* Powered by 1 x CR123A 3.0V (Included)
* Suitable for any Rifle, Shotgun, Pistol, SMG, AEG grenade launcher
* Output power: 5mW
* Wavelength: 635nm
* Length: 11 cm height
* Weight: 300g
4x20 Scope Illuminated Red/Green Mil Dot Reticle
Another great release. 4 x 20 Mini Size, Mil-dot Aiming System, Red/Green Dual Illuminated Reticle, Integral Carry Handle Mount Included, and Flat Top Adaptor is Included. Built-In Bullet Drop Compensator for 100 to 500 Meter Usage of .223 or 5.56 NATO Spec Round. Complete with Flip-Open Lens Covers You asked for an illuminated 4x20 scope for the AR carry handle and Flat top, Here it is!
6x32 Leapers 5th Gen Armor Coated Illuminated Scope
Another New Release!This Fully Armor Coated scope features Mil-Dot range estimating crosshairs, Flip up lens caps. Integral carry handle mount and flat top mount both included, allowing this scope to fit lots of applications. Illuminated Red and Green reticle for easy target acquisition! Mini length scope perfect for the AR15, SKS, AK, Mini-14, Mini-30 and many more!
Magnification: 6X
Tube Dia.: 25 mm
Objective Dia.: 32 mm
Field of View @100 yards: 21 .3’
Eye Relief: 3.0"
Exit Pupil: 4.5mm
Click Value@100 yards: 1/4”
Length: 8.6"
Weight: 13.6 oz
Parallax Setting: 100 yds
Batteries: CR2032 3V Lithium
Red Dot Red/Green
NEW GEN Golden Image Quick Aim Electronic Dot Sight with Red/Green Illumination and 1” Tactical Rings – Complete with Premium Flip-open Lens Cover! This baby is Hot! Variable brightness dot features new side control! This new release pricing cannot last long!
Model: SCP-RD25RGW
Magnification: 1X
Objective Dia.: 32mm
Field of View @100 yards: 45’
Eye Relief: Flexible
Exit Pupil: Flexible
Click Value@100 yards: 1/4 ”
Length: 7.0”
Weight: 6.5oz
Battery: 2XA76 Button Batteries
FEATURED Homerun pricing New item!
The SCP428P, Another New Exciting Scope for You! In Stock and Shipping NOW!!
AR15 4x28 scope with built in bullet drop compensator for 100 to 500 meters. This great package
includes Two Mounts,a mount for the carry handle, plus a flat top mount. Have the best of both worlds!
AR15 4x28 scope with built in bullet drop compensator for 100 to 500 meters. This great package
includes Two Mounts,a mount for the carry handle, plus a flat top mount. Have the best of both worlds!
*Power:4x
*Objective Dia:28mm
*Tube Dia: 34mm
*Field of View: 22'@100yds
*Eye Relief: 3 in
*Exit Pupil: 7mm
*Click Value: 1/4 inch (1 click@ 100yds)
*Length: 8.3 in
*Weight: 12.5oz
AR15 4x20 scope and mount, Delta style (mounts on carry handle) Fantastic scope, easy quick installation
and features a bullet drop compensator built into scope!
AR15 Handguard Rail
Rail for the AR Handguard, mounts in existing holes in handguard, weaver, long rail, 11 inches long with mounting hardware!
AR Handguard Rail M4
Handguard Rail for the M4 or standard handguard. Rail for the AR Handguard, mounts in existing holes in handguard, weaver, 6in long.
Just in! We are one of the first to offer this Complete Carry Handle
for the AR type rifles, New item! Use on flat top guns, acts as a
carry handle and rear sight. Windage and elevation adjustments
on rear sight.
WoW, what a mount! Fits on the carry handle with plenty of ring slots to mount
scope, laser and flash light. Comes with our 1" tactical weaver rings. Mount
all the accessories you dreamed about on your AR type rifle.
Strong and strudy mount attaches to carry handle of AR type rifles
One piece machined construction with see-thru design. Takes standard
Weaver rings and has 11 slots for scope or accessory placement.
Triple rail system fits any rifle with a weaver base. Holds up to a 40mm objective, rings
are one inch diameter. System gives you three rails to mount goodies on.
Medium height.
Triple rail system fits any rifle with a weaver base. Holds up to a 40mm objective, rings
are one inch diameter. System gives you three rails to mount goodies on.
Low height.
Triple rail system Great for the AR15 carry handle or Flat Top.
Works great on any Weaver Rail base 3 inches long. Will hold up to
a 40mm scope objective. Adjustable weaver rails, includes 1 inch
rings. Works great on SKS/AK/FAL/Mini 14 and lots more!
Triple rail system, see thru, works on any weaver base 5 1/2 in long.
Works great on SKS/AK/FAL/Mini 14 and lots more! Mounts on the AR flat Top
rifles.
Use with any style weaver ring, will accept Stanag style scopes.
Triple rail system for the AR15 carry handle.
See thru design drops in AR carry handle.
AR15 and clone Military Tactical Mount. Superior Mil-Spec design. Solid
machined construction with black matt finish, takes Weaver rings or Stanag
rings. See-thru mount seats neatly inside the upper receiver handle.
Riser mount for flat top AR-15s, FALs and other rifles. Solid construction,
Precision machined to exact tolerances from aircraft-grade aluminum alloy.
Clever retention thumb nuts and locking plate for easy and quick installation.
Anodized black matte finish. Has plenty of slots for maximum scope ring adjustments.
Solid Mount, not see thru.
AR15 Riser Mount, new generation Weaver style riser mount for flat top
AR15's, FALs and others. Precision machined.
Click Here to return to top of Page
AR15 and AR Stocks and Stock Accessories
AR Quad Rail System
New Full Metal Quad Rails Now In! Just released new product, all metal handguard rail system. Four Mil-Spec Picatinny rails for a variaty of accessories, solid locking very secure fit! Simple installation, no gunsmithing or required. Fits CAR length model 4, model 15 and model 16 and variants. Hard anodized finish for wear resistance and years of hard use.
AR Quad Rail Medium Length MNT-HG416MA
Much requested! Mid length AR Quad Rail System! Precision machined for maximum strength! Four mil-spec Picatinny rails for all accessory applications! Simple and friendly installation, no gunsmith or tool required. Solid locking features for the most secure fit. Ultimate tactical solution to enhance accuracy under toughest environments. Fits mid length Model 4,15,16 rifles and variants! Hard anodized finish for wear resistance. UTG rubber rail guard included for great comfort and protection.New Quad Rail just released and much requested!
AR Quad Rail Rifle Length
Precision machined for maximum strength! Features Four mil-spec Picatinny rails for versatile accessory applications. Simple and easy installation, no gunsmith or tool's required. Integral assembly alignment front tabs and spinal cords to guarantee perfect rock solid fit! Ultimate tactical solution to enhance accuracy under the toughest environments. 12" Length, 27 slots on each side of Picatinny/Weaver quad rail, Fits rifle length Model 4, 15/16 and variants. Hard anodized black finish for wear resistance and includes free 20 piece set of UTG rubber rail guards comfort and protection
Tactrical Light Foregrip for 1" Diameter Lights
Ambidextrous combination Vertical Foregrip and light mount. CN machined from 6061 Aircraft grade aluminum and type II class 3 hard black anodized. O ring sealed waterproof compartment in bottom, fits Weaver or Picatiny rails! Made in the US!
Quick Release Front Grip and Magazine Holder
This Revolutional Accessory enables you to carry a spare mag, ready to use, on your weapon.
The MG20 serves as a spare mag carrier, but also as a unique ergonomic fore grip.. Quick Release button - just slide the grip onto the rail.
. Backup Locking Screw - Should you decide to lock it in place when not using the quick release mechanism.
. Magazine release button - similar to the AR15/M16 one - to quickly release the magazine.
. Can be used as an ergonomic foregrip even without the magazine inside.
Quick Release Vertical Grip and Bipod
The T-Pod, our newest vertical grip, is based on the design of our very
popular TAL-4 product, the foregrip we developed a little over a year
ago at the request of the Drug Enforcement Agency (DEA). However, the T-Pod
also includes an incorporated fully adjustable bipod, offering even more functionality!
Aluminum bipod legs, adjust to 4 positions
Dual pressure pad cutouts for light/laser pressure pads
Quick-deploying mechanism provides a very stable bipod with a wide stance.
The T-POD is made in Israel by FAB Defense and features a lifetime warranty.
Also note the use of our PLS1B side rail taclight mount also available from us
in picture showing TPOD in use!
AR15 / M16 Tactical Magazine Carrier
New mag holder allows user to carry magazine in the ready at all times. Holder
protects the mag well from dirt and debris while keeping a loaded magazine close
at all times. Magazine is held parallel to the gun. A great way to carry your
gun and a loaded magazine together but not loaded, a requirement in many situations with
both military and police operations.
Foregrip with 1" Tactical Light/Green Laser Adapter and Integral On/Off Trigger
This unique tactical grip allows the operator to use his 1" Flashlight.. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself.
(No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super lightweight and fits 1" lignts with a push button back as well as 1" lasers with push button switch
Side Rail Mount 1" Light Mount
Right-Angle mount places the light in the best position for your system. Quick detach unit can be mounted either left or right or bottom mount placing the light in the correct position to be operated without affecting the hold on the vertical grip! Will mount 1" lights as well as 1" lasers.
Side Rail Mount 1" Light Mount for handguns
A smart new solution to mount a 1" flashlight to a handgun.
Quickly mounted with the tail-cap switch in an exact ergonomic position for easy and correct tactical operation.Features:
* Fits perfectly on most handgun accessory rails.
* Designed to hold all 1" flashlights.
* Bolt locking system to secure the flashlight to the mount.
* Newly designed quick release mechanism for fast addition or removal.
* Tough rigid and lightweight reinforced polymer design.
* Allows perfect access to the flashlight button.
* Easy installation.
Taclight Rail Mount Holder 1" Light
Fits all Picatinny Rails, easy to fit with quick release mechanism. Special angle-lip design for easy flashlight insertion. Secure bolt locking system and made of a reinforced lightweight polymer composite!
Rail Mount Laser and Flashlight Mount 3/4"
Great Light/Laser holder for units 3/4 inches in diamater. Quick release operation as well as bolt locking system to secure. Moulded from reinforced lightweight polymer composite. Fits all types of Picatinny rails!
M4 Shorty Handguard with Liner
Great quality replacement handguard for M4 carbine. Oval shaped with double heat-shielded aluminum lining. Light weight and extremely tough and durable for use under all weather and environment conditions. Available in Black, Tan and Green! These are heavy duty beefed up handguards, great for adding rails to you handguard! See our Rail system below Part Number MNTHGR16S
AR Pistol Grip UTG
Brand new AR Postol Grip with Palm Swells, Thumb Rest, Non-slip Texture and plug. Features robust design with combat grade synthetic materials, ergonomic finger grooves provide solid and repeatable grip. Additional hand support privides stable and easy trigger operation! When only the best will do!
AR Folding Pistol Grip
You thought we offered it all! Now an exciting and new Pistol Grip For your AR15/M4/M16 family of rifles. Start with a great feeling Pistol Grip and add a folding feature and you have the ultimate!
Deluxe M4/M-16/AR-15 Handguard Picatinny Rails (Set of 2)
1. Exceptionally designed for use with AR-15, M-16 and M4 style handguards.2. Picatinny dimensions allow for most wide range of accessory applications.
3. Attach to handguard with screws and housing adaptors for quick and rock solid installation.(hardware included)
4. Designed with swivel housing and complete with a swivel adaptor to allow for additional optional QD swivels or bipod installation. See this swivel above Part Number QDSW28!
Ambidextrious Foldable Rail Mount Foregrip
Much requested and now avaialble! Our very popular ARVGRIPE verticle grip in a folding model! This baby folds either forward or rearward and has 5 locking positions! Pressure switch slots, battery/tool storage compartment, all the features you have grown to love about the ARVGRIPE! Hurry, this is a special promotional new product launch price, get them while this early shipment lasts! Available in black only at this time!
AR Verticle Deluxe Grip
At last a Verticle Grip like you knew could be built. Ergonomic Design, Non Slip Handle! Features a battery compartment for 3 lithium 123 batteries or 2 AA Batteries! Also built in Pressure Switch Housing on each side of grip! Picatinny Mounting Deck! A feel that you just will not believe! Hurry, these are going fast. Available in Black, Tan, and Green!
AR Verticle Grip with Rail
AR Verticle Grip with rail and mounting hardware. Mounts to your fore grip! Rail is 6in long.
NEW!! AR-15 Strikeforce Stock Package ARA2400
Brand new Stock Pagkage for the AR! Strikefroce But Stock and Pistol Grip Kit! Fits Collapsible AR stocks! See specs below!Six-Position Collapsible Stock with Adjustable Cheekrest, Buttpad and Pistol Grip
* Six-Position Collapsible Buttstock * Pistol Grip uses original mounting hardware for installation
* Removable/Adjustable (3/8") Cheekrest * Virtually Indestructible
* Non-Slip, Removable Buttpad * Scratchproof/Weatherproof
* Uses Original Buffer Tube * Matte Black
* Sling Swivel Stud * Glass-Filled Nylon
* Slot for Tactical Sling Attachment * Made in USA
* Ergonomic, Textured Pistol Grip * Lifetime Warranty
* No Gunsmithing
Note: AR-15 Stock Must Be Extended 3" to Operate Charging Handle
FITS: All AR-15 and Variants
Part #ARA2400
Now Available in Black, OD Green and Desert Tan!
NEW ITEM With HOMERUN pricing!AR15 6 Position Adjustable M4 Stock
New Lower Price!
AR15 collapisible stock. SIX Positions , M4 Carbine Stock
with SIX Adjusting Positions. Complete with Buffer Spring, for Pre
ban gun. NEW ITEM. For those of us that have to have the BEST!Also see Cheekpiece and Rubber Butt Pads below!
AR 6 Position M4 Stock in Black
AR 6 Position M4 Stock in Green
AR 6 Position M4 Stock in Tan
AR15 4 Position Stock
AR15 and clones, 4 position Car stock. Includes heavy duty buffer and spring! See our butpads below for the 4 position stocks!
AR15 Stock Spanner Wrench
Wrench is used to install and remove Collapsible AR and M16 stocks. Grips the castle nut to loosen and tighten the stock. A must have for every AR owners tool box! Use with all collapsible stocks!
AR-RESTOR Hydraulic Buffer
Enidine AR-Restor Hydraulic Recoil Buffer. This is the best buffer on the market today! Reduce felt recoil, improve accuracy, reduce fire rate, suppress bolt bounce, and protect your valuable optics with this simple drop-in replacement. Enidine hydraulic recoil buffers have been employed in military applications to reduce recoil, improve accuracy and increase reliability. Drop in and fits all collapsible stocks. The Enidine AR-Restor Hydraulic Recoil Buffer comes with a full 1 year warranty.
Sling Attachment Plate Double Attachment
Another new release! Whew!! Double point sling attachment plate replaces the collapsible 4 or 6 position stock retaining plate. Allows sling to be looped thru the plate allowing weapon to be worn on either the left or right side. Sling length is not affected by positioning of the collapsible stock. Made of Steel.
AR Buttpad
Non slip checkered Rubber Buttpad fits CAR-15 6 position stocks. This heavy duty butt pad has a thicker "sleeve lip that is reinforced"! Adds 1" of padding to the stock. Fits retractable AR 6 position Stocks, Fits Shotforce Shotgun Car-15 Stock and fits AK Car15 Stock.AR Buttpad in Black
AR ButtPad in Green
AR ButtPad in Desert Tan
AR Butt Pad Military Style
Military Style Butt Pad for the 6 Position AR15/M16 rifle Stock. Military symbols with thick sleeve lip, Re-enforced for the 6 position M4 Retractable Stock, 1" extension
AR Butt Pad
Butt Pad for the 4 Position AR15/M16 rifle Stock. Non-Slip Texture and Sleeve Lip Re-enforcement. 1" extension
AR Butt Pad Military Style
Butt Pad for the 4 Position AR15/M16 rifle Stock. Ergonomic Design, Military symbols and Sleeve Lip Re-enforcement for the 4 position Retractable Stock. 1" extension.Lets throw in a combo deal! Part of our 25th Anniversery sale!!
AR Stock Combo Deal
This Deal features our above AR 6 Position collapsible Stock and our New Heavy Duty ARBUTB Black Butt Pad. Get them together and save!
AR15 CHEEKPIECE
AR15 Carbine Cheekpiece adds height to your cheekrest, made of soft rubber, snaps on collapsible carbine extension tube.Just In NEW product!
AR Side Sling Swivel
Barrel Mount Side Sling Swivel. Allows use of Tactical Slings and better positioning of the Rifle for quick use!
Rail Mount Sling Swivel
Great new Tickbite Tactical™ item! Picatinny rail mount sling swivel. Fits and locks on any Picatinny rail. Handles any sling up to 1 1/4 inches wide. Heavy duty construction for hard use!Another NEW product!
Sling Swivel for any stock with a swivel post. Also includes hardware to mount on
AR15 Mil Spec handguards. Handles any sling 1in wide or less. A new item we
have had a lot of demand for! Just in time, we work hard for our customers!
Harris Bipod Adapter
Clamps to rail, mounts Harris Bipod to your Rail.
AR Rail Panel
11R 1913 Rail Panel, Sold each panelClick Here to return to top of Page
AR15 Accessories
AR15 Cleaning Kit AR and M16
1-5 Piece Rods (includes loop)
Adaptor
2-Dual-ended Nylon Brush
3-Bore and Chamber Brushes
4-Oil Bottle
5-Cleaning Cloth
6-Nylon Pouch with 2 Pockets
7-Metal Belt Hanger/Alice Clip
Belt Loop
Complete Model 15/16 Cleaning Kit with 5 piece rods (includes loop), adaptor, bronze bore brush, chamber brush, dual-ended nylon brush, oil bottle, and cleaning cloth. Accessories are neatly stored into a 2-compartment lightweight nylon storage bag with Velcro closure. Alternatively, they can be easily stored in the A-2 buttstock as well 8.6 oz Cleaning Kit replaces conventional hefty weight cleaning gear. Great for field operations or at-home cleaning Pouch includes belt loop and Alice clip for attachment to belt or web gear.
Weapon Lubricating Wipes
You are in the field, or on the hunt. How do you wipe down your weapon? We now have the answer! Special low abrasive lubricated cloth wipes clean and oils weapons! Pop up field box of 40, will not harm any type of finish, made from A mineral oil with vegtable base additives. Contains no solvent.
Bird Cage Compensator
Bird Cage screw on compensator for the AR rifle with threaded barrell. Does a great job of holding the barrel down while shooting.
AR Compensator Long Style
How about a AK Soviet style compensator for your AR. This is it! Screw on compensator is patterened after the AK74 Russian Compensator. It has proven itself over and over for being very effective at controlling climb on AK's. Screws on AR threaded barrel's.
AR Combi Front Sight Adjustment Tool
Optimal Length and Slimmer Ergonomic Design for Ease of Use! One Piece Precision Machined Steel Part, Adjust Elevation of either 4-Prong or 5-Prong A1/A2 Front Sight Post!
AR Brass Catcher
Spent shell brass catcher for the AR and like rifles. Mesh bag catches brass, zippered botton allows for easy removal. Straps around handguard, wire frame holds in position. Don't want to leave your brass behind, you need this!
AR Multi Tool
This tool just about does it all when working on your AR type rifle. Heavy duty steel with protective finish! This is the Armor's heavy duty wrench. Version 1, usually used with earlier fixed stock rifles.
AR Multi Tool
This tool just about does it all when working on your AR type rifle. Heavy duty steel with protective finish! This is the Armor's heavy duty wrench. Version 2, usually used with later collapsible stock rifles.
AR Handguard Tool
Handguard removal and installation tool. Makes the job of handguard removal a snap. Simply insert tool into the mag well, and pull back against the delta ring to release the handguard. Reverse to install the handguard.
AR15 / M16 Lower Receiver Vise Block
Use this block to work on and install parts to AR-15 and M16 Lower Recievers. This block is locked into the users vice. Block slips into the rifles magazine well and is held in place by the mag catch. Constructed of black injection polymer!
Single Point Tactical Sling
High speed single point sling, features quick release buckle. Can be used on a large array of weapons! Easy carry and easy pull up for quick firearms use. Currently available only in Black.
Used on many rifles including M16 and AR15, 1 1/4 width
heavy black webing, fully adjustable. Military surplus in
new condition
AR15 Accuwedge Buffer
Fits near your takedown pin and keeps the upper section snug and tight against the lower. Increases accuracy, decreases vibration and prevents wear. This is a must have accessory for the AR! Need more! 3 pack special!
Low Profile Rail or Stud Mount Bi-pod With Combat Stand TLBP69ST
(TL-BP69ST) High Tech Durable Aluminum Construction. Features Picatinny and Swivel Stud Mounting Systems, Posi-Lock Feature to Prevent Tipping, Panning with Fully Adjustable Center Height From 9” to 11", New Combat stand feature!Low-Profile Dragon Claw Clamp-on Barrel Bi-pod TLBP08ST
(TL-BP08ST) High Tech Durable Aluminum Construction, Adjustment Wheel for Wide Range of Barrel Sizes - 11mm to 19mm. User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9” to 11”, New Combat stand feature!
Low-Profile Deluxe Universal Pictanny & Swivel-Stud Bi-pod
(TL-BP69S) High Tech Durable Aluminum Construction. Features Picatinny and Swivel Stud Mounting Systems, Posi-Lock Feature to Prevent Tipping, Panning with Fully Adjustable Center Height From 9” to 11"
Low-Profile Dragon Claw Clamp-on Barrel Bi-pod
(TL-BP08S) High Tech Durable Aluminum Construction, Adjustment Wheel for Wide Range of Barrel Sizes - 11mm to 19mm. User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9” to 11”
Rail and Swivel Stud Mount Bipod
New Bipod just released, features: High Tech Durable Aluminum Construction, Foldable and Fully Adjustable from 11” to 14 1/2”, Posi-Lock,Tip-Proof, Picatinny Mount, Swivel Stud Mount and Direction AdjustableIt just keeps getting better!!
Multi Function clamp on metal bipod. Features a wire cutter and
multi fold out tool. comes in a OD Green pouch and includes an Alice Clip. Easy to use anywhere
on any gun!
Featherlight fully adjustable bipod, mounts to sling swivel stud. Adjustable feet and
it swivels to allow you to zero in on your target without having to remount the bipod.
Lightweight and a lifetime warranty! A must have!
Rail Mount Aluminum Bipod
Another Tickbite Tactical™ product! Heavy duty Aluminum bipod mounts to any Weaver or Picatinny rail. Adjustable Height from 8.3" to 11.4". Weighs in at 13.1 oz and is black in color. Folds back when not in use!
AR15 Handguard Mount Bipod
Just in time! This bipod mounts on the AR handguard rail. Need a rail? Go to our AR Gear page and get the rail you need! Metal construction!
AR15 Bayonet Lug Mount Bipod
After many requests for a AR Bayo Lug Mount Bipod, here it is! Again, we deliver! SOLID ALUMINUM BIPOD THAT CONNECTS DIRECTLY TO THE STANDARD M-16/AR-15 BAYONET LUG WITH A QUICK DETACH BUTTON SYSTEM. EXTENDABLE LEGS FOR REST HEIGHTS BETWEEN 8.5 TO 11.25 INCHES.N.W (OZ.): 12.8
LENGTH (INCH): 8.25 (CLOSED POSITION)
Click Here to return to top of Page
AR MAGAZINES
AR15 40 Round Steel Magazine
Just in! AR 15 40 RD mags, Heavy Duty with mags Steel body new condition mags. Previously banned and restricted, Now you can own them, hurry! These babies have the Green followers.AR15 40 Round Steel Aluminum
Just in! AR 15 40 RD mags, Heavy Duty with mags Aluminum body new condition mags. Previously banned and restricted, Now you can own them, hurry! These babies have the Green followers.
AR15 30 Round Translucent Mag
Finally a new mag for the AR15 that is for real! The L5 is a translucent 30 round magazine developed for the 5.56mm M16/M4/AR15 rifle. It has an impact resistant translucent polymer body, corrosion resistant steel feed lips and a removable, patent pending, rubber coated bottom. The L5 was designed to be used with the existing magazine pouches and carriers
AR15 30 Round Steel Magazine
Just in! AR 15 30 RD mags, Military Spec mags Steel body new condition mags. Previously banned and restricted, Now you can own them, hurry! These babies have the Green followers.AR15 30 Round Aluminium Magazine
Small Amount back in! AR 15 30 RD mags, Military Spec mags Aluminium body new condition mags. Previously banned and restricted, Now you can own them, hurry! These babies have the Green followers.AR15 20 Round Magazine
Small Amount back in! AR 15 20 RD Steel mags, Military Spec blued mags, steel body new condition mags. Made for the AR Sporter, these fit all AR15/M16 .223 models. Hurry!AR15 20 Round Sporter Mag
AR15 full sized mag body, made to only hold 20 rounds. Gives the rifle the Hi Cap look without Hi Cap capacity. Great for states that have a 20 round cap on rifle mags.AR15 10 Round Steel Magazine Flush Mount
Just in! AR 15 10 RD mags, Steel body new mags for the 223 AR rifles. These babies have the Green followers, and when installed are flush with the mag well.AR15 5 Round Steel Magazine
Just in! AR 15 5 RD mags, Steel body new mags for the 223 AR rifles. These babies have the Green followers.AR15 5 Round Steel Magazine Flush Mount
Just in! AR 15 5 RD mags, Steel body new mags for the 223 AR rifles. These babies have the Green followers, and when installed are flush with the mag well.
Magpul™ 5.56 NATO Standard
Now shipping is the original Magpul™ 5.56 NATO, designed for the M16 weapons System. Since it's release in mid 1999, the Magpul 5.56 NATO has been adopted by Police and Special Warfare units world wide. It is currently used by instructors at Gunsite Academy Inc., Surefire Academy and the Sigarms Academy Pack of three magpuls!Magpul™ 7.62 NATO Standard
Now the same price and quantity as the 5.56 Magpul, the new 7.62 Magul™ which is designed for use primarily with M14, FAL, HK91 and SR25 weapon systems. This design features a new molding process that results in a stronger Magpul Pack of three!
Magpul™ 9mm/45 cal Subgun
Now the same price as the 5.56 Magpul, the new 9mm Subgun Magpul™ which is designed for use primarily with 9mm subguns such as the HK MP5, Colt SMG and Uzi. The Magpul 9mm Subgun will also function on most SW40 and 45cal subgun weapon systems. Pack of three!The Ban is Over! Get these today while you can!
AR15/16 and AR type rifle 90 Round Drum Mag
These babies hold 90 rounds of fun! Weigh in at 1.25 lbs unloaded and 3.60 Lbs loaded. Length is 7.75in (only 3/4in longer than standard 30rd mag! MADE in USA
AR Stripper Clip 223 round
How about a ten pack of these unissued condition military AR stripper clips! Can be used many times! This is a pack of 10.
AR Guide for Stripper Clip 223 round
Guide for the above stripper clips. Allows loading of mags out of the rifle. A must have for any AR shooter!
AR Mag Clamp A much requested item! AR mag clamp! Clamps 2 AR 20 or 30 round mags together. All metal design!
AR Mag Clamp
Mag Clamp clamps AR15/ Mini 14 steel, aluminum and polymer mags side by side for quick loading. This package of 4 will "jungle clamp" two pairs of magazines!Click Here to return to top of Page