Scopes
Lasers
Red Dots
EZ Tap Scopes
Mounts
Rings
Scope Packages
Click here to Contact us with questions?
We regularly carry our merchandise on the road to shows! We will be posting our show schedule soon!
If you are a FFL or C&R holder, Send us a signed copy of your FFL and we will put it in our files. This way there will be no delay in getting our firearms to your door!
PO Box 897, Grifton, NC 28530-phone 1-252-746-2040 fax 1-252-746-2525
Enfield Mount Tri Rail Mount Mauser Mount Ruger Style Mount
MINI 14 Style Mount M1/M14/M1C Mount Galil Mount Pistol Mount
22 Mounts Marlin Style Mount Shotgun Mount Light/Laser Mount
SKS Scope Mounts
SKS Tri Rail Scope Mount
NEW RELEASE!! SKS TRI Rail mount system. Includes New Design Heavy Duty Reciever Cover! Mount your light, laser, scope, red dot, any item you want on this high quality See Thru mount system! Fits all models and versions of the SKS rifle! View SKSTRI Mount On SKS
SKS scope mount w/rings
Replaces SKS top cover, see thru design! Our mount is built on new cast receiver covers, not surplus covers. Best quality, Best fit!
SKS Hi-Pro scope mount w/rings
Replaces top cover. The most stable SKS mount ever.To use the SKSHIPRO mount with our SCPRD25R Red Dot scope you must purchase the below item MNT641 Weaver Plate
SKS HI PRO Weaver Style Rail Plate
So you have one our the above HI PRO mounts and wish you had a weaver rail. Well here it is, Weaver rail mount to be used with the Hi Pro scope mount. Just remove two screws and replace the side rail 1in scope ring and now you have a weaver rail for our TacLight or the Red Dot, or whatever you desire!Hot New SKS Accessory!
New SKS Rail Mount System
Precision machined with maximum strength! Well designed Handguard Tri-Rail with extended length (9" long) to cover the entire gas tube to the rear sight area. Features Three mil-spec Picatinny rails with plenty of slots, 21 slots on each side and 22 slots on top for multiple accessory applications. Top rail center V-cut allows use of iron sight! Rail system locking design includes lower bottom base mating with top piece for a very solid and secure fit! Simple and friendly installation, no gunsmith or tool required - do not need to remove original handguard! Great zero-retention capability for all accessories installed on the rails. Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates superior performance! Ultimate tactical solution to enhance accuracy under toughest environments! Fits Model SKS and variants! Hard anodized finish for wear resistance. UTG rubber rail guards included for great comfort and protection !
Click here to go Back to top of page
AK Scope Mount
Lever Lock AK Scope Mount with Side Rail
In the works for months, we now release our new lever lock side plate mount! Slides on your side plate (we also sell the plates) and with the flip of the locking lever your mount is locked on the side of your rifle. Order this Brand new side mount for the AK today! Great zero retention when removing and installing! This piece mount fits any of the guns with the side plate on the reciever. (AK's, Sar1, Sar2, Sar3, and FPK Romak Dragunov, Saiga). With this mount's quality features you would expect to pay a lot more! Not here! This new mount features a Weaver rail on the top and a side accessory rail! This mount puts scope center of the rifle, not offset!
AK Scope Mount with Side Rail
Brand new side mount for the AK! This is a one piece mount which fits any of the guns with the side plate on the reciever. (AK's, Sar1, Sar2, Sar3, and FPK Romak Dragunov, Saiga). With this mount's quality features you would expect to pay a lot more! Not here! This new mount features a Weaver rail on the top and a side accessory rail! This mount puts scope center of the rifle, not offset!
AK Side Plate Mount PSOWEAV
Just in! We are one of the first to offer these Russian side mount scope mounts with weaver top. These fit on the AK's, Saiga, Vepr, Dragunov's with the side rail mount on gun. (we offer the side mount below!) This is the real thing, not a knock off!!
AK Side Mount Plate
A joint venture between Tickbite Supply Company™ and UTG brings this high quality side plate to you at jaw dropping pricing! Precision machined steel side plate accepts any of the European PSO, POSP etc scopes, as well as our MNT978, MNT973 and PSOWEAV mounts. Designed for the AK, Vepr, Dragunov and Saiga rifles. With a little imagination and mechanical abilities this baby can be installed on many other applications!
POSP Scope Mount Side Plate
These are in and shipping! Russian made side mount (attaches to gun) for the side mount scopes. This is the mount base only, the metal part that attaches to the gun, this is the current military mount in use by the Russian military since 2000! It is steel, machined not stamped. Plate will fit both milled or stamped receivers. PSORAIL will fit our side mount's and POSP scopes , and will fit rifles which were not factory equipped with a side mounted optics rail as well as a new replacement for models that came from the factory with a side plate!
AK Scope Mount MNT970
AK scope mount w/rings, replaces top cover, fits all stamped reciever AK's except the Saiga's.New Second Generation, New Improved Finish!
First Generation finish was not up to our expectations, and as always we constantly improve on our products!
AK Scope Mount MNT970TR
AK scope mount, replaces top cover, fits all stamped reciever AK's except the Saiga's. This tri rail mount allows you to mount all the accessories you ever wanted on your gun. Tri rail and see thru design. In Stock and shipping!Brand New! Hottest Rail System In The Nation!
AK Quad Rail System
We could not wait until after the first of the year to release this great new item. So many or you heard about our new AK Quad Rail that we could not keep it under wraps any longer! So here it is!Fits Model 47 Standard barrel sizes including Romanian AK’s and Its Variants! Precision machined metal quad rail features a hard anodized finish for wear resistance! Four mil-spec Picatiny rails, FREE set of Black Rail Covers included at no extra charge! Extreme secure and solid fit! Fits most AK47 and variants including AK223 and AK74. First full production run is now shipping and is going fast. Order yours today! This is serious hardware for serious sportsmen!
Brand New! Hottest Rail System In The Nation!
AK Quad Rail System (Oversize Barrel)
Same great features as our AKQUAD above, designed for MAK90 and applications with AK rifles that feature oversize barrels and rear sight blocks. Precision machined with maximum strength! Four 6” long mil-spec Picatinny rails with 14 slots each for versatile accessory applications. Rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and secure fit- Lower quad-rail system to secure barrel. Upper quad-rail system to secure gas tube. Easy installation, no gunsmith required. Great zero-retention capability for all accessories installed on the rails. Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance Specially designed groove rail top for optimal viewing through front sight Fits Model 47 and variants with oversized barrel and rear sight block. Hard anodized finish for wear resistance. Rubber rail guards included for comfort and protectionClick here to go Back to top of page
AR Scope Mounts
AR Rear Sight MNT950RS02
M4/M16 Complete Match-grade Rear Sight with Windage/Elevation Adjustment and Integral Picatinny Mounting Deck. What a deal!
AR Removable Front Sight Assembley
Removable Front Sight Tower Complete with A2 Square Post Assembly, Quick detachable front sight with adjustable A2 Square Post Assembly! Fit's all Picatinny/Weaver-style rails. Equipped with locking retention thumb nut. Precision elevation adjustments to enhance shooting accuracy.
AR Flip Up Front Sight
A new much requested item. From Tickbite Supply™ our new AR15/M16 Flip Up front sight. Quick Detachable Front Sight with Adjustable A2 Square Post Assembly to Fit All Picatinny/Weaver-style Rails! Equipped with Locking RetentionThumb Nut. Heavy duty and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions. Precision Elevation Adjustments to Enhance Shooting Accuracy!
AR Flip Up Rear Flat Top Dual Aperture Sight Assembly
Integral Picatinny/Weaver Mounting Deck to Fit All Flat Tops! Dual Aiming Apertures for All Shooting Requirements! Precision Windage Adjustments, Heavy Duty and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions User Friendly Locking Thumb Nut for Easy Installation
Cantilever Mount 30mm with 1" Insert
New Tickbite Tactical™ product! Cantilever mount is just the ticket for our SCPRD1530 1.5x30 red dot, or any similar system where you need the flexibility if a cantilever mount. Unit has quick detach thumb screw (no tools needed), mounts to Weaver or Picatinny spec rails. Unit fits all 30mm tubes and comes with a free 1" insert to use with 1" tube optics, taclights etc!
AR Quad Rail System
New Full Metal Quad Rails Now In! Just released new product, all metal handguard rail system. Four Mil-Spec Picatinny rails for a variaty of accessories, solid locking very secure fit! Simple installation, no gunsmithing or required. Fits CAR length model 4, model 15 and model 16 and variants. Hard anodized finish for wear resistance and years of hard use.
AR Quad Rail Medium Length MNT-HG416MA
Much requested! Mid length AR Quad Rail System! Precision machined for maximum strength! Four mil-spec Picatinny rails for all accessory applications! Simple and friendly installation, no gunsmith or tool required. Solid locking features for the most secure fit. Ultimate tactical solution to enhance accuracy under toughest environments. Fits mid length Model 4,15,16 rifles and variants! Hard anodized finish for wear resistance. UTG rubber rail guard included for great comfort and protection.New Quad Rail just released and much requested!
AR Quad Rail Full Length
Precision machined for maximum strength! Features Four mil-spec Picatinny rails for versatile accessory applications. Simple and easy installation, no gunsmith or tool's required. Integral assembly alignment front tabs and spinal cords to guarantee perfect rock solid fit! Ultimate tactical solution to enhance accuracy under the toughest environments. 12" long top & bottom covers, 27 slots on each side of Picatinny/Weaver quad rail, Fits rifle length Model 4, 15/16 and variants. Hard anodized black finish for wear resistance and includes free 20 piece set of UTG rubber rail guards comfort and protection
Ergo Rail Panel Ladder Style
Ladder Style Rail Panel. Fits Picatinny rails, fits in the grooves for ease of handling. Can be cut to length or use more than one section for longer applications. Flexible panels are 6.875" length. Protect your rails from mud and debris under hard use. One section, black in color.
Barrel Clamp Rail Mounts
Barrel Rail Mounts. Provide one or two rails to mount accessories. Made of tough aviation grade anodized aluminum. Can be installed above and below or on both sides of the weapon. Precision machined for tight fit, durable and lightweight. A great accessory item for any weapon!
Bayonet Lug Rail Mount
Rail mounts to your Bayonet Lug and allows the installation of Weaver/Picatinny accessories such as bipod's, light, laser's etc. CNC machined lightweight Aluminum with a hard anodized finish.
AR Carry Handle MNT950
Just in! We are one of the first to offer this Complete Carry Handle for the AR type rifles, New item! Use on flat top guns, acts as a carry handle and rear sight. Windage and elevation adjustments on rear sight.
AR Scope Mount MNT990
WoW, what a mount! Fits on the carry handle with plenty of ring slots to mount scope, laser and flash light. Comes with our 1" tactical weaver rings. Mount all the accessories you dreamed about on your AR type rifle.
AR Scope Mount MNT992
Strong and strudy mount attaches to carry handle of AR type rifles One piece machined construction with see-thru design. Takes standard Weaver rings and has 11 slots for scope or accessory placement.
AR Scope Mount MNT993
AR15 and clone Military Tactical Mount. Superior Mil-Spec design. Solid machined construction with black matt finish, takes Weaver rings or Stanag rings. See-thru mount seats neatly inside the upper receiver handle.
AR15/M16 Barrel Mount Tri Rail
Brand New and Shipping! Our new Barrel Mount TRI Rail ! Deluxe Tri-Rail Barrel Mount Complete with 2-PC Separated Barrel Adaptor. Hurry, don't let everyone else get one first! Our QDSW28 Deluxe QD Swivel is also available, see below.
QDSW28 Deluxe QD Swivel
Quick Release 1-1/4" Sling Swivel designed for the MNTBR101TR Barrel Mount Tri Rail! Picture shows Swivel on our MNTBR101TR Tri Rail.
AR Scope Mount RG168R25
Triple rail system Great for the AR15 carry handle or Flat Top. Works great on any Weaver Rail base 3 inches long. Will hold up to a 40mm scope objective. Adjustable weaver rails, includes 1 inch rings. Works great on SKS/AK/FAL/Mini 14 and lots more!
AR Scope Mount MNT995TR
Triple rail system, see thru, works on any weaver base 5 1/2 in long. Works great on SKS/AK/FAL/Mini 14 and lots more! Use with any style weaver ring, will accept Stanag style scopes.
AR Scope Mount MNT993TR
Triple rail system for the AR15 carry handle. See thru design drops in AR carry handle.
AR Scope Mount MNTA95
Riser mount for flat top AR-15s, FALs and other rifles. Solid construction, Precision machined to exact tolerances from aircraft-grade aluminum alloy. Clever retention thumb nuts and locking plate for easy and quick installation. Anodized black matte finish. Has plenty of slots for maximum scope ring adjustments. Solid Mount, not see thru.
AR Scope Mount MNT995
AR15 Riser Mount, new generation Weaver style riser mount for flat top AR15's, FALs and others. Precision machined.Click here to go Back to top of page
Mosin Scope Mounts
Mosin Rear Site Scout Scope Mount
What a new find we have for you! Want to mount a scope to your Mosin, but don't want to drill and tap. This 4" long new mount solves the problem and you do not need a turned down bolt for it to work! Our Mount System replaces the rear site. Just remove the rear sight and sight spring and this mount installs in the cavity that housed the rear leaf sight! This mount requires one of our Long Eye Relief scopes and a set of our RGWM25L2 rings and you are in business! Go to scopes to see our Long Eye relief scopes for the necessary long eye relief scope. Note: This mount only works on models M91/30, M44, M91/59, M38, Type 53 with both the 2 3/8" 1000m rear site and the 3 3/8" 2000m rear site. Mount does NOT work on M91 and Finnish rifles that do not have the standard rear site such as the M39. This is our second gen model.
Mosin Rear Site Scout Scope Mount Long Length
Now we offer 2 lengths of our famous Mosin Scout Mount System! Want to mount a scope to your Mosin, but don't want to drill and tap. This 6 1/2 inch long new mount solves the problem and you do not need a turned down bolt for it to work! Our Mount System replaces the rear site. Just remove the rear sight and sight spring and this mount installs in the cavity that housed the rear leaf sight! This mount requires one of our Long Eye Relief scopes and a set of our RGWM25L2 rings and you are in business! Note: This mount only works on models M91/30, M44, M91/59, M38, Type 53 with both the 2 3/8" 1000m rear site and the 3 3/8" 2000m rear site. Mount does NOT work on M91 and Finnish rifles that do not have the standard rear site such as the M39. This is our second gen model.
Mosin Nagant Scope Mount System
Mosin Nagant scope mount system! Mounts on the receiver top with sure locking screws, includes all drill bits and taps needed to install. includes a stainless steel bolt handle to turn your straight bolt into a turned down bolt allowing you to work the bolt without hitting your scope. Weaver rail system (see our rings below for the perfect ring for your new mount!) Turn that inexpensive Mosin into a world class shooter or trophy hunting rifle. Also see our Mosin synthetic Monte Carlo stock under "stocks" to complete the package! Detailed instructions included.Click here to go Back to top of page
HK/CETME Scope Mounts
HK/CETME Scope Mount MNTP668
Low Profile Scope mount for the Cetme/HK rifles with origional receiver. Mount base with 3-point locking to connect with the firearm for solid installation. Bi-Direction mount design to allow for use on most MP5, G3, Cetme applications! clamps to the Lugs on your Receiver.
HK/CETME Scope Mount CET2
Scope mount for the Cetme/HK rifles with origional receiver. Claw mount style fits the lugs on your reciever. Features top rail and one side rail to mount additional accessories. Beautiful addition to any Cetme or Hk rifle!
HK/CETME Scope Mount
Heavy Duty designed and precision machined claw mount for use with G3, MP5 and CETME rifles. Specially designed to accept STANAG rings/scope applications. Also can be used with Weaver adaptor for all scope applications. See adaptor below.
Stanag to Weaver/Picatinny Scope Mount Rail Adaptor
Sits on top of the STANAG mount - Most useful mount to covert from STANAG rail dimension to Weaver/Picatinny rail. Complete with screws to attach the STANAG mount.
H&K G36 Mount Rails
Set of Rails for the HK G36, includes mounting screws. Fit in the pre drilled holes on the G36! These Picatinny rails can also be used on many applications as rail stock! This is a Pair (2) of rails 4" long (980mm) fit the H & K.
H&K G36 Mount Rails
Three 6” long picatenny/weaver rails. Each rail with seven numbered slots and three screw holes with recess housing. Complte with 7 screws in total. Excellent quality and pricing.
MP5 Tri Rail
UTG One-Piece Design Quick Fit Metal Tri-rail Handguard System for MP5 and Variants!
Precision Machined from Aircraft Grade Aluminum for Maximum Strength.
12 Slots Each on Left, Right and Bottom Rails.
Adopts Original Handguard Dimensions and Locking System for the Most Solid and Secure Fit!
Great Zero Retention Capability for All Accessories Installed on the Rails.
Intensively Tested by Field Experts and Well Received Internationally!
Friendly Installation, No Gunsmithing Required.
Complete with 9 PCs UTG Heat-Resistant Rail Guard!
Click here to go Back to top of page
FAL Scope Mounts
FN / FAL Quad Rail System MNTHG981
You have that FAL rifle! You know you always wanted to trick it out! You already purchased our MNT981C scope mount, but you know you want more! Here it is, the all new revolutionary Quad Rail System for your FN/FAL brought to your Tickbite Supply™:UTG FN/FAL Tactical Metal Quad Rail Interlocking System
· Precision Machined with Maximum Strength
· 22 Top Slots, 25 Left and Right Side Slots and 25 Bottom Slots for Versatile Accessory Applications
· Simple and Friendly Installation, No Gunsmith or Tool Required
· Ultimate Tactical Solution to Enhance Accuracy under Roughest Environment
· Hard Anodized Finish for Wear Resistance
· 19PCs of UTG Rail Guard Included for Great Comfort and Protection
They are back! Shipment just in!
FAL Scope Mount
Latest Gen. Deluxe FAL Mount with Integral Sliding Rail (MNT-981C) One piece body, machined from aircraft-grade aluminum alloy. Mount replaces the dust cover. Superior design with integral sliding rail system allows for quick and easy installation and does not require locking plates. Takes standard Weaver type rings and has plenty of slots for scope or accessory placement. Optimum height/width clearance for all popular scopes. Larger ejection port for optimum performance, Inch and metric compatible, Accommodates aftermarket T-Bars for SUITS. Lower Weaver base allows the use of iron sights
FAL Stanag Scope Mount
Fits both inch and metric receivers. Made of aircraft grade aluminum alloy with superior quality. One-piece integral sliding rails. One-piece integral STANAG mounting deck to accommodate any STANAG scope or rings. Also can be used with Picatinny adaptor for all other scope applications. Maintains the use of your iron-sights. Installs in seconds. Use with our T28 scope for a direct Stanag fit or use our MNTHKAD1 adapter listed below to adapt to Weaver/Picatinny spec.This is a very well made mount, heavy duty with a supurb fit and finish. Finely machined, easy installation, It will enhance the function of any FN or FAL rifle!
Stanag to Weaver/Picatinny Scope Mount Rail Adaptor
Sits on top of the STANAG mount - Most useful mount to covert from STANAG rail dimension to Weaver/Picatinny rail. Complete with screws to attach the STANAG mount.Click here to go Back to top of page
Enfield Scope Mounts
Enfield #1 Scope Mount
Enfield No1 MK3 scope mount, no gunsmithing required, locks between the front receiver and stripper clip guide. Very stable with a weaver rail top. (see our scope rings for the perfect ring for your new mount) Fits the No1 303 Enfield rifles. Do not forget we have synthetic Monte Carlo stocks for the Enfields, look under "stocks". Will not work on the 2A .308 Lee Enfield, this mount is listed below.
Enfield #4 Scope Mount
Enfield No4 scope mount. Same specs and ease of installation as above enfield mounts. Fits the No4 and NO5 303 Enfield riflesClick here to go Back to top of page
Tri Rail Scope Mounts
Just out!
Barrel Clamp Tri Rail
Universal Barrel Clamp Tri-Rail System! Clamps securly around barrel and features two slots per tri-rail. Also has a laser clamping feature! A much requested item! AK/SKS/FAL/AR/Cetme/HK and many more! Loads of Applications!
Barrel Clamp Quad Rail
New from Tickbite Tactical™ Universal Barrel Clamp Quad-Rail System! Clamps securly around barrel and features three slots per Quad-rail. 1.39" length and weighs in at 2.60 oz! A much requested item! AK/SKS/FAL/AR/Cetme/HK and many more! Loads of Applications! Set includes 3 sets of different length screws to mount to any barrel!
Barrel Clamp Tri Rail
Universal Barrel Clamp Tri-Rail System! Clamps securly around barrel and features five slots per tri-rail. Also has a laser clamping feature! A much requested item! AK/SKS/FAL/AR/Cetme/HK and many more! Loads of Applications!New Shotgun Tri Rail Mount just in!
You wanted it, and we listen! Our new Shotgun barrel and mag tube Tri-Rail
Mounts! The MNTBR003XL features 3 slots per rail, the MNTBR003XL 5. Both have a Taclight mounting
feature and fit barrel/mag tube with a diameter of 20mm to 25mm. Get yours today, hurry, these cannot
last long! Mount your Taclight, Laser, Bipod or any rail mount accessory to your shotgun. Finally a secure, rugged mounting
system for that prized Shotgun!
Shotgun Barrel Clamp Tri Rail
Much requested item! Our new Shotgun/Paintball Tri-Rail mount. This mount features 3 slots per rail. Mount includes a flashlight clamping feature, fits diameter of 20mm to 25mm, hurry these are sure to go fast!
Shotgun Barrel Clamp Tri Rail
Much requested item! Our new Shotgun/Paintball Tri-Rail mount. This mount features 5 slots per rail. Mount includes a flashlight clamping feature, fits diameter of 20mm to 25mm, hurry these are sure to go fast!SKS Tri Rail Scope Mount
NEW RELEASE!! SKS TRI Rail mount system. Includes New Design Heavy Duty Reciever Cover! Mount your light, laser, scope, red dot, any item you want on this high quality See Thru mount system! Fits all models and versions of the SKS rifle! View SKSTRI Mount On SKS
AR15/M16 Barrel Mount Tri Rail
Brand New and Shipping! Our new Barrel Mount TRI Rail ! Deluxe Tri-Rail Barrel Mount Complete with 2-PC Separated Barrel Adaptor. Hurry, don't let everyone else get one first! Our QDSW28 Deluxe QD Swivel is also available, see below.
QDSW28 Deluxe QD Swivel
Quick Release 1-1/4" Sling Swivel designed for the MNTBR101TR Barrel Mount Tri Rail! Picture shows Swivel on our MNTBR101TR Tri Rail.
Tri Rail System RG17825WM
Triple rail system fits any rifle with a weaver base. Holds up to a 40mm objective, rings are one inch diameter. System gives you three rails to mount goodies on. Medium height.Tri Rail System RG17825WL
Triple rail system fits any rifle with a weaver base. Holds up to a 40mm objective, rings are one inch diameter. System gives you three rails to mount goodies on. Low height.Tri Rail System RG168R25
Triple rail system Great for the AR15 carry handle or Flat Top. Works great on any Weaver Rail base 3 inches long. Will hold up to a 40mm scope objective. Adjustable weaver rails, includes 1 inch rings. Works great on SKS/AK/FAL/Mini 14 and lots more!Tri Rail System MNT995TR
Triple rail system, see thru, works on any weaver base 5 1/2 in long. Works great on SKS/AK/FAL/Mini14/ AR Flat top, and lots more! Use with any style weaver ring, will accept Stanag style scopes.
Tri Rail System MNT993TR
Triple rail system for the AR15 carry handle. See thru design drops in AR carry handle.
Tri Rail System RG17825DM
Triple rail system for standard .22 dovetail base. Will hold up to a 40mm objective scope. Medium height.Rails are 3 1/8 long.AK Scope Mount MNT970TR
AK scope mount, replaces top cover, fits all stamped reciever AK's except the Saiga's. This tri rail mount allows you to mount all the accessories you ever wanted on your gun. Tri rail and see thru design. In Stock and shipping!Click here to go Back to top of page
Mauser Scope Mounts
Mauser Scout Mount (No Gunsmithing)
A new Tickbite Tactical™ release! Our Mauser Scout Mount replaces the rear sight blade on K98, VZ24 and other like Mauser rifles. Simply remove the rear sight blade and spring. Our scout mount fits in the housing, mounts solid, and requires no drilling or tapping. You must use a long eye relief scope (check out our SCP2732L and SCP3530L scout mount scopes on our SCOPE page) or red dot scope. Easy installation, easy use, ring out all the fun from that old Mauser!
Mauser Bolt On Scope Mount
No drilling or tapping, Clamps solidly around any Large Ring Mauser rifle. Weaver style rail. For turned down bolt see our bolt handle below!
Mauser Bolt System MAUBOLT
Mauser Rifle conversion bolt kit, converts straight or partially bent bolt to bolt suitable for scope clearanceClick here to go Back to top of page
Ruger Style Mounts
Rail Mount 10/22
Excellent quality and easy to install! Weaver/Picatinny Style, tactical low profile for all scope applications. 4.65 inches (118mm) long with 11 slots on rail to allow for flexible eye relief adjustments. Complete with screws for installation on .22 rifle
Ruger Type 10/22 Scope Mount Rail
Scope mount for the 10/22 Ruger rifle. Allows use of Standard Weaver style base Rings. Mounting Screws included. Includes Screws, mounts in the holes already on your 10/22! Same Great mount available in Silver!MINI14 Type Scope Mounts
Mini 14 Quad Rail System MNT-HG214QR
Precision Machined from Aircraft Grade Aluminum for Maximum Strength, 20 Top Slots, 11 Left and Right Side Slots and 10 Bottom Slots! Features Innovative Double Locking System with Zero-Gap Tight Tolerance for Secure Fit. Great Zero Retention Capability for All Accessories Installed on the Rails! Intensively Tested by Field Experts and Demonstrates extreme Performance! Friendly Installation, No Gunsmithing Required.
Mini 14 Dual Scope Mount
Precision Machined with Maximum Strength Double Mil-spec Picatinny Rails for Versatile Accessory Applications! See-thru Design for Clear View of Iron Sights. Law Enforcement Grade Quality! Fits Ruger Mini-14 Rifles. Simple and Easy Installation, No Gunsmith or Tool Required. Free 1" Weaver Rings Included. Hard Anodized Finish for Wear Resistance
Tactical Forearm Ruger Mini 14/ Mini 30
A much requeste item, our Ruger Mini 14 and Mini 30 16" optic and accessory mounting platform! Attaches solidly to the rifle barrel, provides Picatinny mounting rails at 12, 3, 6 and 9 o'clock locations. Provides a solid 16" platform, solid aircraft grade aluminum black hard anodized construction. All mounting hardware included! Another Tickbite Tactical™ product!
Mini14 Type Scope Mount
Mini 14 Scope mount with thumb wheel lock. Weaver rail allows mounting of scopes and red dots! Black finish.
Mini14 Type Scope Mount
Mini 14 Scope mount with thumb wheel lock. Weaver rail allows mounting of scopes and red dots! Silver finish.
Mini 14 Ranch Rifle and Mini 30 Ranch Rifle Mount
Scope mount for the Ruger Mini 14 Ranch Rifle and the Mini 30. Weaver top rail. Black finish, 4.76oz gross weight, 7.0 inches length
Mini 14 Ranch Rifle and Mini 30 Ranch Rifle Mount
Same mount as above available in Silver finish. Scope mount for the Ruger Mini 14 Ranch Rifle and the Mini 30. Weaver top rail. Silver finish, 4.76oz gross weight, 7.0 inches lengthClick here to go Back to top of page
M14/M1/M1C Mounts
M14 Tactical Tri Rail MNT-HGM14TR
Precision Machined with Maximum Strength! 6-Point Rock-solid Locking System with Quick Fit Features. Top Rail and Removable Side Rails, Full Compliance with Mil-spec 1913 Picatinny Standard. 31 Top Slots, 13 Left and Right Side Slots for Versatile Accessory Applications. Simple and Friendly Installation, No Gunsmith or Tool Required! Ultimate Tactical Solution to Enhance Accuracy under Roughest Environment. Hard Anodized Finish for Wear Resistance. 12PCs UTG Rubber Rail Guard Included for Great Comfort and Protection!
Tactical Forearm for M1 Carbine
Tactical Forearm for M1 Carbine 16" Optic Mounting Platform. Fits Military and Commercial M1 Carbines, attaches solidly to the carbine barrel. Provides Picatinny mounting rails for 12, 3 and 9 o'clock locations. Provides 16" optic mounting platform. Solid aircraft grade aluminum black hard anodized construction. All mounting hardware is included. Another Tickbite Tactical™ product!
M14 / M1A Heavy Duty Steel Scope Mount
Allows rifle scopes, holographic sights and red dot sights to be mounted solidly over the rifle receiver. The mount is extremely low profile. Mount makes contact with the receiver at four points of contact for rock solid accuracy. Constructed of black oxide high carbon steel. Another Tickbite Tactical™ product!
M14 / M1A Heavy Duty Steel Scope Mount
Allows rifle scopes, holographic sights and red dot sights to be mounted solidly over the rifle receiver. Mount is Medium to High profile. Makes contact at 5 points for solid optic mounting. Magazine stripper clip guide needs to be removed and replaced with a mount attachment for installation. Accepts Weaver and Picatinny rings and mounts. Constructed of black oxide high carbon steel. All hardware included. Another Tickbite Tactical™ product!
M1 Carbine Scope Mount
New M1 Carbine scope mount system. Features weaver rail. Makes mounting a scope in your Carbine a snap! Another Tickbite Tactical™ product!Click here to go Back to top of page
Galil Scope Mount
Galil Scope Mount
Back after a long absence! Scope Mount for the Galil. Holds any AR Carry handle style Mount or Scope. Check these out under the AR section of our site! Hurry, this item has been out of stock for a year, this is a small shipment!Pistol Mount
Pistol Scope Mount
Another new release from the Tickbite Tactical product line! Pistol scope mount for pistol's with the accessory groove under the barrel! What a new addition! Mount that red dot or long eye relief scope on this new accessory rail system. This new item is in and shipping! Also, features a lower accessory rail for lights/lasers!
HK USP Compact M3/6 Rail Adapter
HK USP compact Size M3/6 Flashlight and Weaver Rail Adapter. Hard Anodized Aircraft Grade Aluminum construction. Adapter clamps the accessory rail of the HK compact pistols. Rail allows use of flashlights and lasers designed to attach to Weaver or Picatinny Rails!
HK USP Full Size M3/6 Rail Adapter
HK USP Full Size M3/6 Flashlight and Weaver Rail Adapter. Hard Anodized Aircraft Grade Aluminum construction. Adapter clamps the accessory rail of the HK Full Size pistols. Rail allows use of flashlights and lasers designed to attach to Weaver or Picatinny Rails!Click here to go Back to top of page
22 Mounts
22/Airgun Rail (Dovetail) to Weaver Rail Adapter
Excellent quality and easy to install! Convert you airgun/.22 base to Weaver/Picatinny rail! 3.94 inches (100mm) long with 9 slots with grooved rail top to allow for flexible eye relief adjustments. Complete with screws for installation on airgun/.22, including stop pin
22 Quad Rail With Free Rail Covers
What a new item we have for you! Precision machined for maximum strength! Four mil-spec Picatinny rails for versatile accessory applications. Simple and no gunsmith installation! Interlocking system with quick fit features! Includes a special slot to accommodate rear iron sight. Specially designed groove rail top for optimal viewing through front sight. 33 top slots, 25 left and right side slots and 6 bottom slot. A complete and very affordable tactical solution offering endless options of scope, flashlight, laser, bipod, foregrip on your favorite 10/22 rifles. Great zero-retention capability for all accessories installed on the rails. Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates extreme performance. Hard anodized finish for wear resistance. Includes 14 PCs UTG rail guards included for great comfort and protection. While this was designed for the 1022, our customer feedback is telling us these are being mounted on all kinds of 22 rifles.Click here to go Back to top of page
Marlin Style Scope Mount
Marlin Lever Action Scope Mount
Marlin lever action Weaver style rial. This rail bolts onto the pre drilled holes on your receiver. Length 4.73"Click here to go Back to top of page
Shotgun Mount
Mossberg 500 Scope Mount
Excellent quality and easy to install! Weaver/Picatinny Style, tactical low profile for all scope applications, 5.5 inches (140mm) long with 13 slots on rail to allow for flexible eye relief adjustments. Complete with screws for installation on Mossberg 500 Series and compatiblesClick here to go Back to top of page
Laser and Light Mount
Taclight and Laser 1" Rail Mount
New Light and Laser Mount with Adjustable Clamping Feature for Flashlight Diameter 23-26mm. Light Weight, Precision Machined Aluminum with Anodized Black Matte Finish! Mounting Base Designed with Locking Hex Screws to Fit on Mounts with Picatinny/Weaver Dimensions!
Foregrip with 1" Tactical Light/Green Laser Adapter and Integral On/Off Trigger
This unique tactical grip allows the operator to use his 1" Flashlight.. The most ergonomically designed vertical foregrip.
. Has storage compartment for batteries, cleaning kit...
. A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself.
(No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail.
. Mounted using a quick release locking system with an additional locking screw as backup.
. No gunsmithing required.
. Molded from reinforced polymer composite.
. Super lightweight and fits 1" lignts with a push button back as well as 1" lasers with push button switch
Side Rail Mount 1" Light Mount
Right-Angle mount places the light in the best position for your system. Quick detach unit can be mounted either left or right or bottom mount placing the light in the correct position to ble operated without affecting the hold on the vertical grip! Will mount 1" lights as well as 1" lasers.
Side Rail Mount 1" Light Mount for handguns
A smart new solution to mount a 1" flashlight to a handgun.
Quickly mounted with the tail-cap switch in an exact ergonomic position for easy and correct tactical operation.Features:
* Fits perfectly on most handgun accessory rails.
* Designed to hold all 1" flashlights.
* Bolt locking system to secure the flashlight to the mount.
* Newly designed quick release mechanism for fast addition or removal.
* Tough rigid and lightweight reinforced polymer design.
* Allows perfect access to the flashlight button.
* Easy installation.
Taclight Rail Mount Holder 1" Light
Fits all Picatinny Rails, easy to fit with quick release mechanism. Special angle-lip design for easy flashlight insertion. Secure bolt locking system and made of a reinforced lightweight polymer composite!
Rail Mount Laser and Flashlight Mount 3/4"
Great Light/Laser holder for units 3/4 inches in diamater. Quick release operation as well as bolt locking system to secure. Moulded from reinforced lightweight polymer composite. Fits all types of Picatinny rails!
Mini Light Adapter, insert goes around mag light to adapt it
to 1in ring
Click here to go Back to top of page